NEW Lexair Multi Mini Rhino Bar Hydrodynamic Bar Feed, 6' or 12' available

General Specifications from Manufacturer

Specifications - The MULTI MINI RHINOBAR utilizes a single tube, muzzle-loaded
design with interchangeable three tube cartridge. One cartridge of the
customer selected sizes is included in the base MULTI MINI RHINOBAR price.

The MULTI MINI RHINOBAR can accommodate bar stock up to 3/4" diameter by 6' or
12' lengths.
Overall length - 17'. For applications where space does not permit using a
full 12' bar, a 6' bar model is available with overall length of 11'.

The hydraulic system requires 15 gallons of Pennzoil AW-100 hydraulic oil or
equivalent, which is supplied by the customer. Pump motor - 1 hp, 220/440
volts, 3 phase.

MULTI MINI RHINOBAR Features
*Engineered for Swiss style CNC screw machines & small headstock lathes
*Feed tube indexing in seconds
*Standard Z axis capability
*Positive, pusher retention system
*Heavy duty construction for maximum rigidity and vibration prevention
*Unique swing-out mechanism for ease of reloading bar stock
*Removable pendant for convenient operator control

Quality and utility are the basis of the MULTI MINI RHINOBAR bar feed and no
effort has been spared to insure that the end product will provide the service
you require.

All prices subject to change without notice*****

MULTI MINI RHINOBAR Model MMRB .750-12'-----------------------------$21,750.00
MULTI MINI RHINOBAR Model MMRB .750-6'------------------------------$21,250.00

Additional Feed Tube Cartridges priced as follows:

1/4", 3/8", 1/2" ................................. $4,650.00
1/4", 1/2", 5/8" ..................................$4,650.00
3/8", 1/2", 3/4" ..................................$4,650.00
Optional cartridge with 1 1/8" feed tube...........$5,700.00

Optional Spindle Liners - Each spindle liner size is priced as follows:
NOTE: Prices based on Lathe Draw tube I.D., not stock size.
1/4" to 3/4"...................................... $700.00 each

NOTE: All bar stock must have a 30 degree chamfer cut on the pusher end to
achieve the highest performance.

Optional Step Down Transformer for lathe applications that run on
440 Volts....................................... $POR

Optional Multi Mini Rhinobar Custom Electrical Cable Package with plugs $490.00
(Required if OEM Interface includes special plugs instead of Terminal Strip)

Optional Front Mounted Safety Switch
(For use on Swiss Screw Machine applications)......$720.00

Warranty - One year, parts and workmanship

Electrical Lathe Interface - Lathe must have programmable open & close of
chuck and an appropriate interface provided by the lathe manufacturer. If an
interface is not available, please contact Lexair and we will work with the
lathe manufacturer or quote the cost to develop an interface where possible.

Installation - The standard installation includes set-up and leveling of the
bar feeder, alignment with lathe spindle and bolting to floor (bolts
included), electrical connection to lathe, (interface supplied by builder),
training and run-off of the bar feeder.

Proper training and run-off depend on the lathe being operational, tooled and
programmed, as well as stock and machine operator being available.

Note: Additional time, travel and expenses caused by customer, dealer or OEM
delays will be billed at $180 per hour on site, $100.00 per hour travel plus
expenses.

Installation by Lexair Personnel................................... $4,000.00

Delivery - 3-4 Weeks at this time