GANESH GTW - 5240 CNC “Dual-Chuck” T - Lathe, new 2014
CNC Lathes (Turning Centers)GANESH GTW - 5240 CNC “Dual-Chuck” T - Lathe
52” Swing Capacity, 43” Z-Axis Travel
New 2014 - Absolutely great condition
Standard GS 4-position Programmable Hydraulic Toolpost with 4 Coolant Nozzles & 40mm tool height
Dual Chip Conveyors are standard for efficient chip removal
3-Gear Ranges for High Torque
Set up with Face Plate on;
front and rear set up for using dual chucks
Productivity Advantages:
Compatibility with previous versions Series 0 and 0i-Models A, B and C
Make use of existing part programs
Thread Repair Cycle
Stored Pitch error compensation for each axis
400 Program storage with 512K of user memory
Background editing
Simple programming and operation
Minimal training required
Operator friendly graphic display for part program verification
Multi-Language Support
Extended help functions and alarm/operation history
64-Tool Offset Pairs
Tool Life Management to maximize machine utilization
Cutter Compensation for direct input from drawings
Ethernet RJ-45, RS-232, USB interfaces
Standard Nano-Interpolation and advanced functions like and AI Contour Control (AICC-1)
provide enhanced surface finish results and exacting feature definition
Swing | 52" |
Machining Length | 43" |
# Axis | 2 |
Bar Capacity | 10.04" |
Distance Between Centers | 43.25" |
Turning Diameter | 3,652" |
Power | 30 hp |
Max RPM | 550 RPM |
Tailstock | Yes |
# of Turrets | 1 |
Control | CNC (FANUC 0ITD) |
Dimensions | 165” L, 90” W, 90” H |
Weight | 16600# |
Capacity & Dimensions-
Swing over Bed 52” (1,320 mm)
Swing over Cross Slide 36.20” (920mm)
Center Height 25.60” (650mm)
Width of bed ways 35.40” (900mm)
Tool Turret- 4-Way programmable tool turret
Spindle-
Spindle Motor – 30kw 30-HP (30-HP 30-Min. Rated)
Spindle Speed Range 5 - 550 Spindle RPM in 3-gear ranges
Spindle Speed by 3-Gear Ranges 1: 5-110rpm, 2: 12-250rpm, 3: 27-550rpm
Spindle Bore 10.04” (255mm) (14” optional)
Spindle Bore – Big Bore Option 14.37” (365mm) optional w/400rpm max.
Spindle Nose (Front & Rear) A2-15 (A2-20 w/14” bore)
Spindle Bearing Type Taper Roller Bearings
Workpiece weight limit when held in chuck 2,200 lbs (1,000 kgs)
Workpiece weight limit when held in chuck & steady rest 6,600 lbs (3,000kgs)
Rear Chuck Swing Capacity 25”
Axis Data-
Rapid Traverse Feedrate, X & Z-Axis 394 IPM (10m/min)
X-Axis Cross slide travel 27.5” (700mm)
Z-Axis Longitudinal travel 43.25” (1100mm)
X-Axis Servo motor 2.5 HP (1.9kw)
Z-Axis Servo motor 5.0 HP (3.6kw)
Ball Screw Diameter (X-Axis) 1.5” (40mm x P5)
Ball Screw Diameter (Z-Axis) 2.5” (63mm x P10)
Cross Slide Dimensions LxW 39.4” x 11.40” (1000 x 290mm)
Minimum input unit 0.0001” (0.001mm = 40 millionths of a inch)
Weight & Dimensions-
Overall machine length 157.50” (4,000mm)
Overall machine width 86.60” (2,200mm)
Overall machine height 85.40” (2,170mm)
Shipping dimensions 165” L, 90” W, 90” H
Machine weight 16,535 lbs (7,500 kg)
Shipping weight 17,600 lbs (8,000 kg)
Coolant System capacity / power 40 gallons (150 liters) / ¾-HP pump
Electrical Requirements – Fanuc motors and drives 220vac ±5%,