Ganesh VMC 4020 Vertical Machining Center

To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.

General Specifications:
Working Area
X-Axis Travel: 40.94” (1,100 mm)
Y-Axis Travel: 21.06” (535 mm)
Z-Axis Travel: 21.06” (535 mm)
Spindle Nose to Table Distance: 4” – 26” (100 - 660 mm)

Milling Table
Table Size: 43.31” x 18.70” (1,100 x 475 mm)
Table Load: 1,750 Lbs (800 kg) (Higher if weight is evenly distributed)
T-Slot Center Distance: 3.15” (80 mm)
Column Front to Table Center: 13.4 – 29.13” (340 – 740mm)

Milling Spindle
Spindle Bearings: P4 Class-7 Angular contact spindle bearing
Spindle Transmission Type: Belt Drive - Torque Increaser Style
Spindle Tool Taper Size: #40-Taper (BT or CAT style)

Spindle Drive
A.C.Brushless Motor Electronic: 2-speed torque range Vector-Drive
Spindle Motor: 20-hp Peak, 15-hp (60% duty-cycle)
Spindle Speed (Stepless): 8,000 RPM

Axis Feed Drive
Resolution: 0 .0001” (0.0025 mm)
Rapid Traverse Feedrate: 787 IPM (20m/min)
Cutting Feedrate: 0.04 - 394 IPM (0.01-10m/min)
Axis Motor Horsepower: X-Y = 2-hp / Z = 3-hp
Ballscrew Mounting: Double-Anchored Precision Double-Nut Ballscrews
Positioning Repeatability: ±0.0001” (0.0025 mm)
Positioning Accuracy: ±0.0002” (0.005 mm)

Tool System
Tool Magazine Type: Double Arm-Type
Number of Tool Stations: 24-tool High Speed ATC
Tool Taper Type: CT #40 or BT #40
Tool Diameter: ∅3.9” (∅ 100mm)
Tool Weight: 15 lbs (7 kg)
Tool Change Time: 2.5 Seconds with High Speed ATC