Toyoda GL4P-100E CNC Straight Head Grinder

To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.

General:
Swing Over Table: 12.9"
Distance Between Centers: 39.37"
Wheel Configuration: 90°
Maximum Grinding Diameter: 11.8"
Maximum Load Between Centers: 330 lbs

Grinding Wheel:
Type: Conventional
Wheel Size (OD x ID): 15.9" x 5"
Maximum Wheel Width: 3.93"
Wheel Surface Speed: 1692 IPS

Wheelhead:
Spindle Bearing: TOYODA STAT® Bearing
Slide: V and Flat Slide
Feed System: Ballscrew and Servomotor
Rapid Feedrate (on diameter): 590 IPM
Minimum Increment (on diameter): 0.0001 mm Table
Type: Two (2) Piece / Swiveling
Slide: V and Flat Slide
Feed System: Ballscrew and Servomotor
Rapid Feedrate: 590 IPM
Minimum Increment: 0.0001 mm
Table Swivel (CCW to CW): 5° to 0°

Workhead:
Type: Live/Dead Spindle with Swivel Base
Workhead Swivel (CCW to CW): 90° to -30°
Work Speed (variable): 16 to 500 rpm
Center Taper: MT #4

Footstock:
Type: Hydraulic with Manually Repositioning Quill
Taper Adjustment: Manual
Quill Stroke: 6.2"
Retraction Stroke: 2.36"
Center Taper: MT #4

OD Gage:
Type: TOYODA FN-1252
Location: Table

Locator Gage:
Type: Metrol
Location: Wheelhead

Motors:
Wheel Spindle Motor: 10 HP
Work Drive Servomotor: 1 HP
Wheelhead Feed Servomotor: 1.7 HP
Table Traverse Servomotor: 2.4 HP

Tank Capacities:
Wheel Spindle Lubrication Oil: 3.96 Gallons
Hydraulic and Way Lubrication Oil: 5.2 Gallons