Haas SL-20T CNC Turning Center, New in 2006
CNC Lathes (Turning Centers)
Haas SL-20T CNC Turning Center, New in 2006
8", 3 Jaw Hydraulic Chuck
A-2 5C collet chuck
Approx 20 sets soft jaws
1 set of hard jaws
Programmable Tailstock
Tool Presetter
Parts Catcher
Mist Buster Mist Collector
M19 Spindle Orientation
Exact Stop Mode Change
Spindle Drive Line Accelerator
Spindle Load Monitor
Remote Jog Handle
Chip Auger
Rigid Tapping
Quick Code
Including an A-2 5C collet chuck and about 20 sets of soft jaws and one set of hard jaws.
Original Owner
Spindle Time: 1,828
Primarily Cut Aluminum, Steel and Brass
| Swing | 23" |
| Machining Length | 24" |
| # Axis | 2 |
| Bar Capacity | 2" |
| Chuck Size | 8" |
| Turning Diameter | 10.3" |
| Power | 20 hp |
| Max RPM | 4,000 RPM |
| Tailstock | Yes |
| Live Tooling | No |
| Sub Spindle | No |
| Control | CNC |
| Dimensions | 105" x 74" x 87" |
| Weight | 9,000 LBS |
To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.
General Specifications:
Turning Diameter: 10.3"
Turning Length: 20"
Spindle Speeds: 4,000 Max RPM
Spindle Drive: 20 HP Vector
Spindle Nose: A2-6
Hole Thru Spindle: 3.0"
Hole Thru Draw Tube: 2.06"
Turret Capacity: 10 Station
Turret Travels (X,Z): 8.45" / 20"
Swing Over Bed: 23"
Swing Over Saddle: 9.5"
Rapid Traverse Rate (X/Z): 710 IPM
Turret Index Time: 1 Second Per Station
Tailstock Travel: 20"
Tailstock Quill Diameter / Taper: #4 Morse Taper
Machine Dimensions: 148” x 73” x 81”
Machine Weight: 9,000 lbs
