2021 Expand Machinery GenTurn 52 CS Y2 LATHES, COMBINATION, N/C & CNC | Automatics & Machinery Co., Inc.
Overview
Type:
LATHES, COMBINATION, N/C & CNC
Manufacturer:
Expand Machinery
Model:
GenTurn 52 CS Y2
Condition:
New - In-Stock
Year:
2021
Stock #:
601738
Status:
For Sale
Description

New 2021 Expand Machinery GenTurn 52CS Y2 8-Axis TWIN-SPINDLE TURN/MILL CENTER WITH DUAL “C” & “Y” AXIS

Equipped With

All 52 CS Y2 machines come with all standard accessories listed below: contact us for complete comprehensive quote with all available options and descriptions of  Parts catcher and finished parts fabric conveyor with parts catcher basket  A-52 “Dead-Length” Collet System for main and A-42 “Dead- Length” for the sub spindle  Automatic belt-style chip conveyor and wheeled chip cart  Sub-spindle programmable air blast, oil flush and finished parts ejector  Automatic Barfeed Interface, Barfeed Connector, Toolbox & Tool Kit  Automatic Power off controller & Air-conditioned electrical cabinet  Dual ¾-hp 50psi Coolant Pumps, with double coolant filtration and a coolant flow monitor  ER-20 Collet Extensions – Total of 6 single-end ER-20 collet extensions for 25mm tool bores  13 live-tool ER-20 gear-driven collet spindles & 4-sets of spare M-codes

Specifications
Machining Length4.33"
# Axis8
Bar Capacity2"
Live ToolingYes
Sub SpindleYes
ControlCNC (Mitsubishi)
Dimensions113" x 71" x 78"
Weight13,880 lbs

All Information From OEM Brochure Should Be Verified By Buyer: MACHINE SPECIFICATIONS: Main Spindle Maximum RPM / spindle bearing 6,000 RPM Spindle Motor 10-HP (7.5kw) Collet Nose / Spindle Bore Traub TRB-52 / 51mm (uses TRB-52 collet) Maximum Barstock Diameter 2” (51mm) Maximum Cut Length 4.33” (110mm) Remnant Length 7.64” (194mm) Spindle Center Height 43.3” (1100mm) Sub Spindle Sub spindle RPM / spindle bearing 6,000 RPM / 4-bearing Quad-Duplex pair configuration Sub spindle Motor 6-HP (4.4kw) Collet Nose / Spindle Bore Traub TRB-42 / 43mm (uses TRB-42 collet) External Air Blast nozzle Included for both main & sub spindle Finished Parts Ejector & air blast Included for sub spindle Axes Specifications X1-axis Travel 8.66” (220mm) Y1-axis Travel (true Y-axis, not compound Y) 24.41” (620mm) Z1-axis Travel 18.1” (460mm) X2-axis Travel 14.9” (380mm) Y2-axis Travel (true Y-axis, not compound Y) 5.11” (130mm) Z2-axis Travel 18.1” (460mm) Rapid Traverse Rate – X1, X2, Y1, Z1, Z2 1,181 IPM (30 m/min) Rapid Travers Rate – Y2 196 IPM (5 m/min) Axis Drive Servo Horsepower: X1/Y1/Z1 1-3/4 / 1-3/4 / 1-1/8HP (1.3kw / 1.3kw / .85kw) Axis Drive Servo Horsepower: X2/Y2/Z2 1-1/8 / 1.0 / 1-1/8HP (.85kw / .75kw / .85kw) Minimum input unit 0.0001” (0.001mm = 40 millionths inch) Tooling – 33-Tool Positions Standard All live tools are gear driven w/ ø42mm bearings – no belts! Main Spindle Cross slide Radial live tools 6-ER-20 cross slide live tools, 6,000 rpm, 2.0 HP (1.5kw) Main Spindle Front slide Axial live tools 3-ER-20 front slide live tools, 6,000 rpm, 1.0 HP (0.75kw) Main Spindle OD Turning Tool Positions 6 (5x 5/8” + 1x 3/4”) (5x16mm) + (1x20mm) Main Spindle ID Turning Tool Positions 5 ID Tool Bores (25mm) Sub Spindle ID Turning Tool Positions 5 ID Tool Bores (25mm) (back of main tool bores) Sub Spindle ID Turning Tool Positions 4 ID Tool Bores Static holders in sub spindle tool block) Sub Spindle Back slide Axial live tools 4-ER-20 (can add 4 more) 6,000 rpm, 4.0 HP (3kw) (1 radial live tool can be substituted on Sub Spindle tool block) Machine Dimensions Machine Length 113” add 31” for chip conveyor Machine Depth 71” (1803mm) Machine Height 78” (1977mm) Machine Weight 13,880lbs (6,300kgs) Coolant Pump Dual 50psi 1-HP Coolant Pumps for main and Sub Spindle Coolant Tank Capacity 63-gallon coolant tank, with coolant flow confirmation sensor Lubrication distribution Way lube distributed at 3-6 cc / 15-minute cycle Hydraulic System – power / capacity 1-HP / 12-gallons (0.75kw / 46L) Machine Power Requirements 220vac ±5%, 35kva, 3-phase, 60Hz, 92 amps Air Requirements 85-PSI at 10-CFM for parts catcher, parts ejector, & air blast

New 2021 Expand Machinery GenTurn 52CS Y2 8-Axis TWIN-SPINDLE TURN/MILL CENTER

New 2021 Expand Machinery GenTurn 52CS Y2 8-Axis TWIN-SPINDLE TURN/MILL CENTER
LATHES, COMBINATION, N/C & CNC