2021 Expand Machinery GenTurn 32GT LATHES, COMBINATION, N/C & CNC | Automatics & Machinery Co., Inc.
Overview
Type:
LATHES, COMBINATION, N/C & CNC
Manufacturer:
Expand Machinery
Model:
GenTurn 32GT
Condition:
New - In-Stock
Year:
2021
Stock #:
601572
Status:
For Sale
Description

New 2021 Expand Machinery GenTurn 32GT CNC Turning Center

Equipped With

Mitsubishi M80 CNC Control 6,000 RPM, 7.5-Horsepower Mitsubishi Spindle Motor Coolant System with Coolant Flow Confirmation Sensing Switch Coolant Tank Mounted on Wheels for Easy Access for Clean-out Hydraulic Closer System for a Non-Slip Grip on Work Holding Devices Manual Spindle Position Lock Plunger for Work Holding Changeover Foot-Pedal Switch for Chuck Open/Close Control Full Machine Enclosure to Control Chips & Coolant within the Machine MPG Hand Wheel Mounted on Operator Control Station Worklight and Full Splashguard Heat Exchanger for Electrical Cabinet Tri-color Machine Condition Display Lamp Automatic Pressurized Centralized Lubrication System Parts Catcher – Pneumatically Actuated Collection Chute Under Spindle Parts Collection Drawer – Catcher Directs Parts to Drawer at Operator’s Knee Barfeed Interface Material Bar-Stop for barfeeding Toolholders for up to 9-Cutting Tools: 2-Dual Tool Holders for 2-axial or 1-cross O.D. Tool. For up to 4 O.D. Tools 1-Dual Tool Holder for 2-axial Mounted Tools 1-Single & 2-Dual 25mm Bore I.D. Tool Holders for a Total of 3 I.D. Tools 5-Piece 25mm Bushing set for I.D. Tool Holders - 8, 10, 12, 16, 20mm Bushings

Specifications
Swing12.59"
Bar Capacity1.25"
Max. Turning Diam.7.87"
Power7.5 hp
Max RPM6,000 RPM
Live ToolingYes
# of Turrets1
ControlCNC (Mitsubishi M80)
Dimensions81" x 64" x 64"
Weight4,850 lbs

To the best of our knowledge all details listed below are deemed correct. It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase. General Specifications: AXIS TRAVEL X-Travel: 8.46” (215mm) Z-Travel: 5.98” (152mm) Turning Diameter / Length: 7.87” / 5.5” (200mm / 140mm) Swing Over Bedways: 12.59” (320mm) AXIS FEEDS Rapid Traverse (X/Z): 787 ipm (20/20m / minute) Rated Cutting Feedrate: 236 ipm (6/6m / minute) Mechanical Way System (X/Z): Box Ways Turcite® Coated & Pressure Lubricated Slant Bed Angle: 20º Slant Bed Angle for Tooling Axis Drive Motor Power (X): 1.0-HP (.75 kw) Axis Drive Motor Power (Z): 1-1/3-HP (1.0 kw) Ballscrew Diameter (X/Z): 32mm Positioning Accuracy (X/Z): ±0.00015” (±0.004mm) Positioning Repeatability (X/Z): ±0.00008” (±0.002mm) Least Input Command Increment: 0.0001” / 0.000040” (0.001mm / (40-millionths in metric) SPINDLE Spindle Nose Mount: A2-5 Spindle Speed: 6,000 RPM Tapping Spindle Speed: 2,000 RPM Bar Capacity: 1-1/4” (32mm) Spindle Bore: 34mm Spindle Bearing – Inside Diameter: 70mm (80mm optional) Spindle Motor Power: 3.7/5.5kw 7.5-HP 5.5kw (10-HP 7.5kw spindle motor optional) Spindle Motor Torque: 26 ft. lbs. (35Nm) Spindle Motor Drive: Coupling Belt Drive Spindle Runout: ≤ 0.000040” T.I.R. TOOLING PLATE & TOOL SYSTEM Tool Plate Overall Dimensions: 8.66” x 36.45” (220mm x 706mm) Tool Plate T-Slot Dimensions: 21mm Base & 12mm Neck Width, (8mm Base Height /17mm Total) T-Slots 3 T-Slots: On 63mm Centers (see Power Point for drawings) Turning Tool Shank Size: 3/4" (20mm) Square Shank Internal Tool Shank Size: 1-1/4” (32mm) (25mm for optional tool turret bores) Optional Driven Tool Horsepower (.75kw) 1-Horsepower with 2:1 speed reduction for increased torque Optional Driven Tool Collet Size (1/2”) 2-ER20 collets in a hydraulic positioned upper/lower format SPECIFICATIONS Air Service Requirements: 85 psi @ 5-scfm 5.5 Kg/cm2 Electrical Requirements - Connected Load: 10kva, 28-Amps 220vac ±5%, 60-Hz Coolant Tank Capacity / Motor Power: 21-gallons / ½-HP 80-liters / 2-amps Lubrication Pump: 150 watts Hydraulic Pump Motor / Pressure: 1-HP / 500 PSI .75 kw / 32-bar Floor space requirements (W x D x H): 81” x 64” x 64” (282 x 135 x 183cm) (+ chip conveyor) Machine Weight: 4,850 LBS (2,200 kg) Warranty – 1-Year Machine Warranty 3-Year Mitsubishi Control, Motors, & Drive Warranty Machines Need Stable 220 Volts, 3 Phase – Please use Appropriate Transformers or Voltage Stabilizers Machine Options: Factory Machine Installation: “Peace-of-Mind Factory Installation” – Includes Expenses:...............$3,995.00 Factory on-site 3-day Machine Operation and Program Training – Includes Expenses:.....................$5,995.00 Belt-Style Chip Conveyor & Chip Cart – Rear Discharge:................................................$3,995.00 Parts Conveyor for finished parts:....................................................................$2,990.00 Extra M-Codes (Total of 8-sets of I/O):...............................................................$2,995.00 C-Axis Option:........................................................................................$3,995.00 2-Position 1-HP ER-20 Face-Drilling Servo Driven Live Tools (details shown under options):............$6,990.00 2-Position 1-HP ER-20 Side-Drilling Servo Driven Live Tools (details shown under options):............$7,990.00 Single I.D. Tool Holder:..............................................................................$295.00 Double I.D. Tool Holder:..............................................................................$490.00 Single O.D. Tool Holder:..............................................................................$295.00 Double O.D. Tool Holder:..............................................................................$490.00 8-Station Hydraulic Turret, 0.3-second index, 20mm box tools, 32mm I.D. bores w/3-tool drill block:...$4,995.00 Air Conditioner upgrade for electrical cabinet (upgrade over standard heat exchanger):................$2,490.00 Coolant Chiller System-12,000 BTU’s for higher accuracy applications:.................................$4,995.00 Dunham air cylinder actuator (for thin-wall parts):...................................................P.O.R.

New 2021 Expand Machinery GenTurn 32GT CNC Turning Center

New 2021 Expand Machinery GenTurn 32GT CNC Turning Center
LATHES, COMBINATION, N/C & CNC