Click the links below to view video demonstrations of this machine: http://www.youtube.com/watch?v=Jce5Ne0cTFc http://www.youtube.com/watch?v=CH5phIDl8BM General Specifications as per Brochure: Bar Diameter Capacity: w/out prep: .196" - 2.00" (5mm - 51mm) with prep: .196" - 2.165" (5mm - 55mm) Max. bar length: 3800 mm (12' 5") Min. bar length: 1000 mm (39.4") Max. remnant length: 530 mm (20.8" Magazine rack capacity: 11" Bar loading cycle time: 30 seconds for 12' bar Material straightness specification: .007" TIR/ft. of material (V blocks, 3 points equidistant) Feed force (pusher torque): max 750 N, adjustable Forward feed rate: 2360 IPM, adjustable Return feed rate: 0 - 1650 IPM, adjustable Power consumption: 1.5 kw Operating voltage: 230V/60Hz 3-phase Control voltage: 24V DC Oil capacity: 80 liters (22 gallons) Oil viscosity: ISO 150 cST Compressed air supply: 6 bar (90 psi) Compressed air consumption: approx. 10 liters per loading cycle Weight (approx.): 6,160 lbs Includes: (1) Guide channel set of your choice (channel sections, pusher & revolving tip (1) Universal hard nose with ID liner (1) Custom lathe cable & interface plug FMB Turbo 5-55 1 Guide Channel Package For Fixed Headstock $54,500 For Sliding Headstock $58,500 FMB Turbo 5-55 12' 2 Guide Channel Set Complete Package: Includes (2) Channel Sets, (2) Pushers, (2) Nose Liners & (2) Pusher Collets (1) Spindle liner For Fixed Headstock $59,000 For Slidng Headstock $63,000 FMB Turbo 5-55, 6', 1 Guide Channel Package For Fixed Headstock $51,800 For Sliding Headstock $56,300 FMB Turbo 5-55, 6', 2 Guide Channel Package For Fixed Headstock $56,300 For Sliding Headstock $60,000 Optional Accessories - Prices Subject to Change: Installation USA..............................................$ 3,450.00 Additional Guide Channel Sets.................................$ 4,800.00 ea (includes pusher, revolving tip, nose liner & spindle liner) Additional Spindle Liner......................................$ 620.00 ea. (needed when selecting a guide channel whose max. bar diameter is smaller than the drawtube of the lathe) Additional Bar Stock Pusher Collets (specific collet required for each bar diameter): for channel set up to 20mm ID...........................$140.00 ea. for channel set from 25mm to 38mm.......................$185.00 ea. for channel set from 42mm to 45mm.......................$230.00 ea. for channel set from 51mm to 55mm.......................$275.00 ea. Polyurethane Bushing Blocks...................................$ 180.00 ea. (1) set includes upper and lower pieces and is used in place of rollers in standard steady rest when machining hex, square or profiled stock Air Knife.....................................................$ 1,700.00 (recommended to minimize bar feeder oil loss when running shafts) Pusher Extension Kit: Version 1 $5,000.00 Version 2 $5,700.00 Axial Shift Device: $5,000.00 Serial Interface: $2,700.00 Tall Stands $1,900.00 Dual Channel Safety Kit: $ 500.00 Movable Roller Steady Kit: $2,900.00 Master liner $ 650.00 required when undersizing barfeeder to lathe spindle (still requires spindle liner) Bundle Loader for 5000 lbs of material Call Edge Bar Feeder installation does not include lathe-side software or hardware interface. This interface must be supplied and installed by the lathe OEM or dealer prior to bar feeder installation. The anchoring of the FMB bar feeder to the floor is a requirement and will be performed by the service technician.