EDGE MINUTEMAN 320 BAR LOADER/MAGAZINE TYPE,HYDRAULIC & MECHANICAL | Automatics & Machinery Co., Inc.
Overview
Type:
BAR LOADER/MAGAZINE TYPE,HYDRAULIC & MECHANICAL
Manufacturer:
EDGE
Model:
MINUTEMAN 320
Condition:
New - In-Stock
Stock #:
262803
Status:
For Sale
Description

New Edge Minuteman 320SE Magazine Type Bar Feed

Specifications
Capacity1"
Bar Length12'

Watch the Edge Minuteman 320 operate (this unit would be configured with a 28mm (1" capacity) channel set: http://www.youtube.com/watch?v=gfruUD-ZLks http://www.youtube.com/watch?v=hecsV85iTcI General Specifications As Per Brochure Bar Diameter Capacity: Without Prep 3mm - 21mm (0.118" - 0.8270) With Prep 3mm - 26mm (0.118" - 1.062") Maximum Bar Length: 12' 5" Maximum Remnant Length: 420mm (16.5") Magazine Rack Capacity: 10" Bar Loading Cycle Time: 25 Seconds for 12' bar Material Straightness Specification: .007TIR/foot of material (V Blocks, 3 points equidistant) Feed Force (pusher torque): max 450 N. adjustable Forward Feed Rate: 1400 inches/min max, adjustable Return Feed Rate: 2360 inches/min max, adjustable Power Consumption: 1.5 kW Operating Voltage: 230/60 Hz - 3 phase Control Voltage: 24V DC Oil Capacity: 46 Liters (12 gallons) Oil Viscosity: ISO 100 cST Compressed AirSupply: 6 bar (90 psi) Compressed Air Consumption: approx 8 liters/loading cycle Weight (approx): 1320 lbs Dimensions (approx): 15' x 2' x 4.25' Includes: (1) Guide channel set matched to the lathes capacity (1) Telescopic nose to match guide channel set (1) O.D. bar stock pusher collet (1) Custom lathe cable & interface plug Minuteman 320 SE (12') $23,100.00 Minuteman 320 SE 12' 2 Guide Channel Set Complete Package $25,300.00 Includes (2) Channel Sets, (2) Pushers, (2) Telescopic Noses & (2) Pusher Collets Minuteman 320 SE 6': $21,100.00 Minuteman 320 6' 2 Guide Channel Set Complete Package Includes (2) Channel Sets, (2) Pushers, (2) Telescopic Noses & (2) Pusher Collets: $23,300.00 Optional Accessories - Prices subject to change without notice: Installation: $3450.00 Additional guide channel set $2750.00 (includes pusher, revolving tip, standard telescopic nose and spindle liner) Spindle liner $ 520.00 (needed when opting for a guide channel set smaller than the lathe's capacity set) Bar stock pusher collets $ 140.00 Moveable anti-vibration bushing blocks $ 240.00 required for profiled material, available in 8mm, 16mm & 22mm Long Pusher Kit $1200.00 Axial Shift Device with Safety Switches $1750.00 High voltage kit $ 750 (required for some lathes) Tall stands $1900 for lathes with spindle center greater than 1200mm Master liner $ 650 required when undersizing barfeeder to lathe spindle (still requires spindle liner) Minuteman 320 SE available in extended length versions Channel Sizes Channel Dia. Min Max Max w/ Bar Ejection 8 7.5 3mm (.118") 6.4mm (.250") 7mm (.275") 11 10 3mm (.118") 9mm (.354") 10mm (.393") 14 12 3.2mm (.125") 11mm (.437") 13mm (.512") 18 16 5mm (.196") 13.5mm (.531") 17mm (.669") 20 18 8mm (.315") 18mm (.709") 19mm (.750") 22 20 8mm (.315") 19mm (.750") 21mm (.826") 24 22 8mm (.315") 20.7mm (.817") 23mm (.905") 28 26 10mm (.395") 25.4mm (1.0") 27mm (1.062") Bar Feeder installation does not include lathe-side software or hardware interface. This interface must be supplied and installed by the lathe OEM or dealer prior to bar feeder installation. The anchoring of the bar feeder to the floor is a requirement and will be performed by the service technician.

New Edge Minuteman 320SE Magazine Type Bar Feed
BAR LOADER/MAGAZINE TYPE,HYDRAULIC & MECHANICAL