Ganesh Cyclone 78-MSY 6-Axis Twin Spindle Live Turret CNC Turning Center, New in 2015

To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.

General Specifications:
Capacity
Turning Diameter Maximum: 12.2" (310 mm) / O8.2" (210 mm)
Center Distance: 41.7" (1061mm)
Turning Length: 24.8" (630mm) maximum

Main Spindle - Integral Spindle
Spindle Nose / Bearing Diameter: ASA Size A2-6 / 4.72" (120mm)
Spindle Bar Cap: 3.070" (78 mm drawtube I.D. / 88mm / 3.465" spindle bore
Chuck Size: 10" (with 78mm bore)
Spindle Center Height: 40" (1,000mm)
Spindle Speed: 60 - 4,000 RPM (Integral Refrigerated Spindle)
Spindle Motor Power: 15/22Kw Hp/ 30-HP (30-minute rating) / 20-HP (Cont)

Sub Spindle - Integral Spindle
Spindle Nose: ASA Size A2-6
Spindle Bar Capacity: 2.559" (65 mm drawtube I.D. / 86mm / 3.386" spindle bore)
Chuck Size 8" (w/ 65mm bore) (10" optional)
Spindle speed: 60 - 4,000 RPM (Integral Spindle)
Spindle motor power 11/15Kw Hp 15-HP (30-minute rating / 10-HP (cont)

Live Tool Turret
Number of turret stations: 16 (Any combo of 16 ID, OD or Live tool stations)
Index time, adj tool / 180 deg index: 0.2 seconds / 1.2 seconds High-Speed Servo Indexing
Live Tool Power / RPM: 3.7/5.5KW (7.5 HP) / 6,000 rpm
Tool Size / Collet Size: 1" (25mm) (for square tool & 32mm round tools) / ER-32 collets
Tool Holder Type & Size: BMT-65 Base Mount Tooling
Turret Thru-The-Tool-Coolant Rated: 1,000 PSI for High Pressure coolant option

"C" AXIS - On both spindles
Spindle Radial Resolution / Speed: 0.001; 360,000 radial positions w/ full contouring cap / 600 RPM

"B" AXIS - (sub spindle travel)
B Axis Rapid Traverse: 1,573 Inch Per Minute (40m per minute)
B Axis Travel: 29.31" (744mm)

Axis Specifications
Axis Travel (X / Y / Z): 9.05" / +/- 1.968" / 23.7"
Rapid Travers Rate (X / Y / Z): 630 / 236 / 1,574 IPM (16 / 6 / 40 m/minute)
Axis Motor Power Horsepower: 3-Hp in X, Y, Z axis
Axis Continuous Thrust Rating Pounds: X = 2142, Y = 2924, Z = 1425 pounds of thrust force
Minimum Programmable Input: 0.0001" (0.001mm = 40 millionths)

Ancillary Specifications:
Hydraulic System Gallons: 8-gallons (30 Liters) with
5-HP (3.5kw) pump motor
Coolant Pumps - Dual Coolant Pumps: 2 x 1.7 hp pumps for tooling
2 pumps for chip flushing
Coolant Tank Gallons: 74-gallon (280 Liters) coolant tank

Mitsubishi M720 CNC Control
-32-GB USB memory or the data server
-G-Code or EIA programming
-NC Monitor2 software allows any networked machines are monitored from a PC in the
office.
-NC Explorer
-NC Trainer Plus
-Program Restart
-G-code Guidance
-Machining Condition Selection
-Navi Lathe
-MTConnect

High Speed-High Accuracy Mode G05 P10000; With one of the fastest processors
in the Industry the control can run programs up to 135,000 blocks per minute
with 680-block look-ahead
SSS (Super Smooth Surface) solves the problem of creating smooth paths

Electrical Requirements: 56 KVA, 220vac 5%, 3-phase, 60 Hz, 130 amps
Air Requirement: 85-psi @ 8-cfm for parts catcher ejector, oil mist lubricator

Machine: 145" x 80" x 84" / 17,650 lbs
Chip Pan/Conveyor: 186" x 67" x 72" / 2,500 lbs
Orion Cooler Unit: 32" x 19" x 48" / 361 lbs