Ganesh GenTurn 65MSY CNC Turning Center, New in 2017

To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.

General Specifications:
5-Axis
Swing Over Bed 24.4” (620mm)
Maximum Cutting Diameter – Main & Subspindle 10.6” (270mm)
Maximum Cutting Length 20.1” (510mm)
Minimum Distance Between Main & Sub Chuck Faces 1.4” (36mm)

Spindle Motor Horsepower – Dual Wound FANUC 11/15kw 25-HP Peak, 20-HP 15-min./hr. duty-rating
Spindle Speed 4,500 RPM (with NSK spindle bearings)
Spindle Torque Maximum 94 ft. lbs. (127Nm)
Spindle Nose A2-6 / 4-bearing spindle
Spindle Bearing Diameter 4.0” (100mm)
Spindle Through Hole 2.4” (61mm)
Bar Capacity (56mm in Draw Tube) 2.047” (52mm) (2.51”, 65mm optional)
Chuck Diameter (with 2.04” (52mm) through-hole 8.26” Auto Strong N-208
Spindle Center Height 46”

Spindle Motor Horsepower – FANUC 5.5/7.5kw 15-HP Peak, 10-HP 15-minute duty-rating
Spindle Torque Maximum 56 ft. lbs. (76Nm)
Spindle Speed 4,500 RPM
Spindle Nose 110mm Flat Nose Spindle
Spindle Bearing Diameter 3” (80mm)
Bar Capacity (in Draw Tube) 1.77” (45 mm)
Chuck Diameter (with1.77” (45mm) through-hole) 6.65” Auto Strong N-206

Axis Travel – X-Axis 8.7 ” (220mm)
Axis Travel – Y-Axis (Largest Travel in This Machine Class) 4.3” ± 2.2” (110 ±55mm)
Axis Travel – Z-Axis 22” (560mm)
Axis Travel – B-Axis 22” (560mm)
C-Axis Resolution – Main & Subspindle 0.001°, 36,000 Radial Positions
C-Axis Accuracy / Repeatability / Speed 0.01° / 0.008° / 33 RPM
Ballscrew Diameter / Pitch Rate – X, Y, Z, B Axis Ø32mm / 10mm pitch
Axis Drive Motors - X & Z 2.4-Horsepower (1.8kw)
Axis Thrust – Maximum - X & Z Axis 3690 lbs. Thrust
Rapid Traverse Feedrate X, Z, B Axis 1181 IPM (30m/min)
Rapid Traverse Feedrate Y 394 IPM (10m/min)
Minimum Input Unit 0.0001” (0.001mm = 40 millionths of a inch)
Guide Ways / Slant Bed Angle (Y-Axis Angle 45°) Rexroth 35mm Roller Bearing Ways / 30°

Tool Stations – Any Combination of ID/OD Tooling/Index Time 12-Stations (Tang-Drive for Driven Tools)
Tool Index Time – Adjacent Tool Station / 180° Index 0.15 sec. / 0.5 sec. - Tool-to-Tool
O.D. Tooling (20mm When Specified for Metric Users) 3/4” Square Shank Tools
I.D. Tooling (32mm When Specified for Metric Users) 1.25”
Driven Tool System / Power (Sauter BMT-45) BMT-45 / 7.5-Horsepower (5.5kw)
Driven Tool Rotary Speed/Rotary Torque 6,000 rpm / 28 ft. lbs., (35 Nm)

Power Requirements 40kVa 220vac ±5%, 26kw, 83-full-load amps
Floor Space Requirements - LxWxH 128’ x 78” x 84” (+ 30” for chip conveyor)
Machine Weight 8,820 lbs. (4000kg.)
Hydraulic Motor Power / Pressure / Oil 2-H.P. / 600 PSI / Mobil #24 Oil
Coolant Pump Power / Pressure / Capacity 1.5-HP / 45 PSI (3 Bar) / 50-Gallons