Haas DT-1 Drill & Tapping Center, New in 2015
Vertical Machining Centers
Haas DT-1 Drill & Tapping Center, New in 2015
Haas CNC Control
Rigid Tapping
Chip Auger
Early Power Failure Detection
Intuitive Programming System
| X-Axis | 20" |
| Y-Axis | 16" |
| Z-Axis | 15.5" |
| # Axis | 3 |
| Power | 15 hp |
| RPM | 12,000 RPM |
| Taper | BT-30 |
| # ATC | 21 |
| Table-W | 15" |
| Table-L | 26" |
| Control | CNC (HAAS) |
| Dimensions | 63" x 55" x 105" |
| Weight | 6,000 lbs |
To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.
General Specifications:
Table Size: 26" X 15"
Weight on Table: 250 LBS
X-Axis Travel: 20"
Y-Axis Travel: 16"
Z-Axis Travel: 15.5"
Spindle Taper: BT-30
Spindle Speeds: 12,000 RPM
Torque: 46 ft-lb @ 1,700 RPM
Spindle Motor: 15 HP
Rapids: 2,400 IPM
Cutting Speeds: 1,200 IPM
Tool Positions: 20 + 1
Tool Diameter: 2"
Tool Length: 7"
Chip to Chip: 1.8 Seconds
Air Required: 4 SCFM, 100 PSI
Tapping
Tapping Speed: 5,000 RPM
Tap Size: (Aluminum) 1/2" x 13"
Rapids on All Axes: 2,400 IPM
Cutting Feedrate: 1,200 IPM
Shipping dimensions:
Machine: 68" x 80" x 96" 6,000 lbs
Chip Pan: 50" x 40" x 22" 150 lbs
