Tsugami BO326-III CNC Swiss Lathe, New in 2019
CNC Swiss Lathe
Tsugami BO326-III CNC Swiss Lathe, New in 2019
Fanuc 32i-B CNC Control
Y & C Axis
Simultaneous Axes Control
Chucker Kit
Main & Sub Spindle Collet Chuck Kit
Frontal Drilling Head
Cross Drill of Front Tool Post
Cross Drill of Rear Tool Post Drive
Rotary Tool of Back Tool Post
Rotary Guide Bushing
2020 12' Edge Patriot 338 Magazine Barfeed
Tri-Mist 850 G2 Mist Collector
Parts Catcher and Conveyor
MP Systems Chip Conveyor
Coolant Pump
Lubricating Oil Pump
Fire Suppression System
Tooling Positions
(7) 5/8" Square Turning Tool Positions on Main Spindle
(7) Live Tool Positions on Main Spindle, 3 Cartridge Type
(8) Live Tool Positions on Back Spindle
(5) ID Positions Main or Back Spindle
Y-Axis Positioning for Back Side Tools
(4) Modular Live Spindles and (4) Static Sleeves with 25mm Bore on Back Working Block
(2) Main Spindle Deep Hole Drill Positions
| Capacity | 1.25" |
| Power | 10 hp |
| RPM | 6,000 RPM |
| # Axis | 8 |
| Swiss, Chucker or Convertible? | Convertible |
| Main Spindle Indexing | Full C |
| Sub Spindle Indexing | Full C |
| Live Back Working Tools? | Yes |
| B-Axis? | No |
| Control | CNC (FANUC 32IB) |
| Dimensions | 88″ x 60″ x 81″ |
| Weight | 10,694 lbs. |
To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.
Specifications:
Control: Fanuc 32-iB
Machining Range:
Chucking Barstock Diameter: ø32 mm (1.26 in.)
Machining Length: 330 mm (12.99 in.) (Direct-Drive Guide Bushing)
70 mm (2.76 in.) (Chucker Mode))
Drilling Diameter: ø12 mm (.47 in.)
Tapping Diameter: M10
Back Spindle Chucking Barstock Diameter: ø32 mm (1.26 in.)
Back Spindle Drilling Diameter: ø10 mm (.39 in.)
Back Spindle Tapping Diameter: M8
Tool Spindle Drilling Diameter: ø8 mm (.31 in.)
Tool Spindle Tapping Diameter: M6
Tool Spindle Slotting Cutter Diameter: ø45 mm (1.77 in.)
Machine Capability
Main Spindle Speed: 8,000 / min-1
Back Spindle Speed: 8,000 / min-1
Tool Spindle Speed: 6,000 / min-1
Total Tool Number: 34
Tool Size: .625" x 3.94" (square) / 25 mm (round)
Rapid Traverse Rate: 35 m/min (105 ft/min) [(X1, Y1, Y2: 24 m/min (78.74 ft/min)]
Spindle Index: C1 Axis and C2 Axis
Motors
Main Spindle: 3.7/5.5 kW
Back Spindle: 3.7/5.5 kW
Cross Drill of Front Tool Post: 1.0 kW
Cross Drill of Rear Tool Post Drive: 1.4 kW
Rotary Tool of Back Tool Post: 1.4 kW
Rotary Guide Bushing: 1.5 kW
Z1, Y1, X2, Z2: .75 kW
X1, Y2: .5 kW
Coolant Pump: .4 kW
Lubricating Pump: 3 W
Others
Compressed air requirement: .4 MPa or more
Air discharge rate: 100 NL/min
Power Source Requirements: 16.8 KVA
Coolant Tank Capacity: 260 L
Machine Dimensions: 103.5” x 50.4” x 77.5”
Machine Weight: 8,818 lbs.
