Lincoln Electric FHS-B2b M710iC12L Robotic Welding System, New 2018 - Delivered 2019
Welding CellLincoln Electric FHS-B2b M710iC12L Robotic Welding System
New 2018 (Delivered 2019)
60" swing x 120" span
2-Rotary Postions - See Layout
VERY low hour usage
Original Cost: over $250,000
Detached Jog
Basic Software Bundle
Thick Plate Welding Software Bundle
Multi-Group Motion
Coordinated Motion
Vertical Light Curtain
FabPak FHS-B2B Dual Zone
Lincoln Power REAM Reaming Station
500lb Drum Kit (20 inch AccuPak drum payoff kit)
Lincoln Electric Statiflex Filter Banks (See Attached PDF)
Danfoss FC 101 VLT Variable Frequency Drive - 7 1/2 HP (See Attached PDF)
3825 CFM Exhaust Fan (See Attached PDF)
To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.
System Span: 120" (Maximum tooling or part span of 120")
System Swing: 60" (Maximum tooling or part swing of 60")
Robot (M-710iC/12L Robot with R-30iB controller):
-Through-arm configuration
-6 axis arm
-12 kg payload
-122.0” reach
-Fanuc R-30iB Robot PLUS Controller
-Arctool Software
-440-575VAC (±10%), 50/60Hz, 3 Phase, 30A Service
-ANSI/RIA Compliant Mechanical Unit/Controller
ArcLink 25ft Cable Kit:
-STT Process Sense Lead
-Heavy Duty Control Cable
-Gas Line Assembly
-Cable Assembly, Ethernet
CoolArc 55s Water Cooler:
-Closed circuit cooling system for water-cooled torches. Contains Flow Sensing Switch
and ArcLink communication.
Power Wave R450:
-Built-In Feeder Control
-PowerConnect Technology: Automatically adjusts to input power while maintaining a constant welding output throughout the entire input voltage range.
-Tribrid Power Module: Exceptional welding performance with high power factor and efficiency.
-Production Monitoring™ 2.1/Checkpoint – Track equipment usage, store weld data and configure fault limits to aid in production analysis and process improvements.
-Input Voltage: 208/230/380-415/460/575/3/50/60
-Output Range: 5 - 550 Amps
Wire Feeder (0.052" Drive Roll Kit):
-Drive Roll and Guide Tube Kit for feeding 0.052" in solid wire. 4 Roll Kit
AutoDrive 4R220 Wire Feeder:
Automatic wire feeder for flux-cored and metal-cored wires.
-Solid Wire size range: 0.023"-1/16" (0.6-1.6 mm)
-Cored Wire size range: 0.035"-5/64" (0.9-2.0 mm)
-Speed range: 30-1200 in/min (0.8-30.5 m/min)
Torch:
-Wire Break
-14" Gooseneck
-Binzel Torch, MIG, Water Cooled
Robot Hardware:
Model A IO AID16D
-24VDC x 16 Digital Input, Isolated True High, 20mS, PNP
Model A IO AOR16G
-250VAC/30VDC x 16 Digital Relay Output, 2.0A
Robot Software:
Advanced DCS Package
-DCS Pos./Speed check
-DCS Safe I/O connect
-4D Graphics