Miyano BNX-51MSY CNC Multi-Tasking Turning Center, New 2021

To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.

General Specifications:
Diameter of std cutting Spindle No. 1: 51 mm Dia. (2")
Spindle No. 2: 51 mm Dia. (2")
Chuck size Spindle No. 1: 6 inch
Spindle No. 2: 5 inch
Maximum machining length: 150 mm (5.9")

Spindle
Number of spindle: 2
Spindle speed range Spindle No. 1: 5,000 rpm
Spindle No. 2: 5,000 rpm
Inner diameter of draw tube Spindle 1: 52 mm Dia.
Spindle No. 2: 43 mm Dia.
Collet chuck Spindle No. 1: H-S22, (DIN177E – option)
Spindle No. 2: H-S22, (DIN177E – option)
Power chuck Spindle No. 1: 6" thru-hole chuck
Spindle No. 2: 5" thru-hole chuck

Turret
Number of turret: 1
Type of turret Turret No. 1: 12 station turret
Shank height of square turning tool: ¾" Sq.
Diameter of drill shank: 1" Dia.

Revolving Tools
Number of revolving tool Turret No. 1: Max. 12
Type of revolving tool Turret No. 1: Single clutch
Tool spindle speed range Turret No. 1: 6,000 min-1
Machining capacity Drill Turret No. 1: Max. 13 mm Dia.
Tap Turret No. 1: Max. M12 ×1.75 (S45C-D)

Slide Stroke
Turret slide stroke
X1 axis: 165 mm
Z1 axis: 300 mm
Y1 axis: 80 (± 40) mm
Spindle slide stroke
X2 axis: 86 mm
Z2 axis: 553 mm

Feed Rate
Rapid feed rate
X1 axis: 20 m/min
Z1 axis: 20 m/min
Y1 axis: 12 m/min
X2 axis: 20 m/min
Z2 axis: 20 m/min

Motors
Spindle Drive
Spindle No. 1: Cs 15/11 kw (15 min/cont.)
Spindle No. 2: Cs 7.5/5.5 kw (15 min/cont.)
Revolving tool drive: 4.0 kw
Slide: 1.5 kw (Z1), 1.2 kw (X1, Y, X2, Z2)
Hydraulic oil motor: 1.36 kw
Lubricating oil motor: 0.004 kw
Coolant pump: 0.25 kw × 1, 0.18 kw × 1
Turret index motor: 1.0 kw

Power Supply
Voltage: AC 200/220 ± 10% 50/60 Hz ± 1%
Capacity: 33 KVA
Air supply: 0.5 MPa
Fuse: 100 A

Tank Capacity
Hydraulic oil tank capacity: 2.6 gal
Lubricating oil tank capacity: 1 gal
Coolant tank capacity: 79 gal