Doosan Puma TT1800SY CNC Turning Center, New in 2007
CNC Lathes (Turning Centers)Doosan Puma TT1800SY CNC Turning Center, New in 2007
Full C Axis Spindle Rotation - Both Spindles
Live Milling/Drilling Capability - Both Turrets
Y Axis Capability on Upper Turret
Twin Turret Design with Upper and Lower Turrets
Dual Spindle Design
LNS Move S2 Short Load Barfeeder
(2) 8" 3 Hydraulic Chucks on both Spindles
Tool Presetter
Parts Catcher
Parts Conveyor
Chip Conveyor
Ethernet Interface
PCMCIA Card Interface
RS 232 Port Interface
3 Color Machine Status Condition Lights
Boxed Ways
Coolant Tank with Pump
All Available Manuals
Swing | 9.05" |
Machining Length | 9.1" |
Bar Capacity | 2.625" |
Chuck Size | 8" |
Distance Between Centers | 38.5" |
Turning Diameter | 9.05" |
Power | 30 hp |
Max RPM | 5,000 RPM |
Sub Spindle | Yes |
# of Turrets | 2 |
Control | CNC |
Dimensions | 154" x 81" x 82" |
Weight | 17,196 lbs |
To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.
General Specifications:
Chuck Size: 8"
Max Diameter Bar Capacity: 2.63"
Max Turning Diameter: 9.05"
Distance Between Spindles: 38.5"
Max Machining Length: 27.38"
Spindle Speed: 50 - 5000 RPM
Spindle Bore (Left & Right): 2.99"
Spindle Nose (Left & Right): A2-6
Spindle Motor (Left & Right): 30 / 25 HP
Spindle Torque (Left & Right): 152 ft. lbs.
Tools (Upper / Lower Turret): 12 / 12 (All Live)
Milling Motor: 7.5 HP
Milling Speed: 5000 RPM
Sub Spindle Motor: 30 HP
Sub Spindle Speed: 5000 RPM
Sub Spindle Travel: 30.31"
Rapid Traverse Rates (X / Z): 787 / 1574 IPM
X-Axis Travel (Upper / Lower Turret): 6.5" / 7.48"
Z-Axis Travel (Upper / Lower Turret): 27.5" / 28.34"
C-Axis Index (Left & Right): .001 Degrees
Y-Axis Travel: 3.93"
Machine Dimensions: 154" x 81" x 98
Machine Weight: 17,196 lbs.