Ganesh Cyclone 32CS Sliding Headstock Turning Center, New 2008
CNC Swiss LatheGanesh Cyclone 32CS Sliding Headstock Turning Center, New 2008
Syntec Control
Parts Conveyor
Parts Catcher
Mist Collector
Capacity | 1.25" |
Power | 10 hp |
RPM | 6,000 RPM |
# Axis | 7 |
Swiss, Chucker or Convertible? | Swiss |
Main Spindle Indexing | 1 deg |
Sub Spindle Indexing | 1 degree |
Control | CNC (900T) |
Dimensions | 99" x 63" x 82" |
Weight | 8,360 lbs |
To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.
Spindle Speed (Main/Sub): 6000 RPM
Spindle Motor: 10 HP
X-Axis Travel: 7.28″
Z-Axis Travel: 6.5″
Rapid Rate Z-Axis: 1181 IPM
Rapid Rate X-Axis: 1181 IPM
Y-Axis Travel: 19.29″
Number of Tools: 27
Live Tool Station: 11
OD Turning Tools: 6 OD TOOLS (1/2? OR 12 MM)
C-Axis Both Spindles: 360,000 Positions
Cross Slide Live Tools: 4-ER-20 Cross Slide Live Tools, 4,000 RPM, 2 HP
Front Slide Live Tools: 3-ER-20 Front Slide Live Tools, 4,000 RPM, 1 HP
Live Tool Collet Size: ER-20 Collet, 1/2” (0.5-13mm) Tool Shank Capacity
Live Tool Speed: 4,000 RPM
Coolant Pump Dual: 50 PSI 3/4-HP Coolant Pumps
Coolant Tank Capacity: 80-gallon Coolant Tank
Way Lube Distributed at 3-6 cc / 15-Minute Cycle
Machine Power Requirements: 220vac ±5%, 63-amps, 3-phase, 60Hz
Machine Dimensions: 99" x 63" x 82"
Machine Weight: 8,360 lbs