Mori Seiki NH4000 DCG 6CPP Horizontal Machining Center, New 2006
MACHINING CENTERS,HORIZ,N/C & CNC(Incl.Pallet Changers)
Mori Seiki NH4000 DCG 6CPP Horizontal Machining Center
Chip Conveyor,
New 2006
MSX-501 III CNC Control
Chip Blaster
Fixtures not included
Chip Conveyor
Cool Blaster System
Coolant thru Spindle - 1000 PSI
| X-Axis | 22" |
| Y-Axis | 22" |
| Z-Axis | 24" |
| # Axis | 3 |
| Power | 25 hp |
| RPM | 14,000 RPM |
| Taper | CAT 40 |
| # ATC | 180 |
| Pallet-W | 15.7" |
| Pallet-L | 15.7" |
| # of Pallets? | 6 |
| Pallet Indexing | 1 Degree |
| FMS System? | No |
| Control | CNC (MSX-501III) |
| Dimensions | 92.9" x 154.1" x 106.7" |
| Weight | 21,120 lbs |
To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.
General Specifications:
X-Axis Travel: 22"
Y-Axis Travel: 22"
Z-Axis Travel: 24.8"
Distance from Pallet Surface to Spindle Center: 3.1" - 25.2"
Distance from Pallet Center to Spindle Gauge Plane: 3.9" - 28.7"
Pallet
Pallet Size: 15.7" x 15.7"
Distance from Floor Surface to Pallet Surface: 41.3"
Pallet Load Capacity: 880 lbs
Workpiece Height: 35.4"
Pallet Surface Configuration: 1/2-13 UNC
Pallet Indexing Angle: 1 Degree
Pallet Indexing Time: 1.54 Seconds
Number of Pallets: 6
Spindle
Spindle Speed: 14,000 RPM
Spindle Taper: CAT 40
Spindle Motor: 25 HP
Feedrate
Rapid Traverse Rate: 1,968.5 IPM
Cutting Feedrate: 1,968.5 IPM
Rotational Speed: 100 RPM
Jog Feedrate: 197 IPM
ATC
Tool Storage Capacity: 180
Tool Diameter: 2.7"
Tool Length: 15.7"
Tool Mass: 17.6 lbs
Tool Change Time: 0.9 Seconds
