Tsugami BO125III CNC Swiss Lathe. new 2015
CNC Swiss Lathe
Tsugami BO125II CNC Swiss Lathe, New 2015
FMB Bar loader
FMB Turbo 2-20 Magazine Bar Feed
MP Systems High Pressure Pump V2H08 SD, 2000 psi (oil only)
Firetrace Fire Suppression System
Tri-Mist Mist 850 G2 Mist & Smoke Collector
Chiller
Part Conveyor
Rotary Part Collector
This machine set up with a chucker and does not have a guide bushing unit.
Also, was ordered without the live tool block so there are no live tools on this machine..
| Capacity | 0.5" |
| RPM | 12,000 RPM |
| # Axis | 5 |
| Swiss, Chucker or Convertible? | Convertible |
| Live Back Working Tools? | No |
| B-Axis? | No |
| Control | CNC (FANUC OITD) |
| Dimensions | 65" x 41" x 67" |
| Weight | 3,740 lbs |
General Specifications As Per Brochure (Please Verify Details):
Control: Fanuc 0i-TD
No of Axes: 5 (X1, x2, Y1, Z1, Z2)
Machinable Diameter: 3-12 mm
Max. Machining Length 210 mm
80/170 mm w/ Rotary Guide Bushing
45 mm Non-guidebushing
Max Main Spindle Drilling Diam: 7 mm
Max Main Spindle Tapping Diam: M6 x 1
Max Back Spindle Barstock Diam: 12 mm
Max back Spindle Drilling Diam: 7 mm
Max Back Spindle Tapping Diam: M8(II)
Max back Drilling Diam: 6(OP)
Max Back Tapping Diam: M5 (OP)
Main Spindle Speed: 200 - 12,000 rpm
Back Spindle Speeds: 200 - 12,000 rpm
Total Number Of Tools: 21 (max)
9 OD Tools
4 ID / BWID
4 BW
Tool Size: 12 mm x 12 mm x 85 mm
Rapid Traverse Rate: 32 m/min
(X1: 24 m/min)
Main Spindle Motor: 1.5/2.2 kW
Back Spindle: 1.5/2.2 kW
X1, X2, Y1, Z1, Z2 axis 0.5 kW
Cross Drill: 0.5 kW (OP)
Coolant Pump: 0.18 kW
Lubricating Oil Pump: 3 W
Power Source requirement: 11 KVA
Compressed Air Requirement: 0.4 MPa or above
Air Discharge rate: 30 NL/min
Coolant Tank Capacity: 115 L
Machine Dimensions: 1640 x 1808 x 1700 mm
65 x 41 x 67 in
Machine Weight: 3,740 lbs
Can be converted to guide bushingless configuration
