Capacity | 0.685" |
Power | 3 hp |
RPM | 8,000 RPM |
# Axis | 7 |
Swiss, Chucker or Convertible? | Convertible |
Main Spindle Indexing | Full C |
Sub Spindle Indexing | Full C |
Live Back Working Tools? | Yes |
Control | CNC (MITSUBISHI M70) |
Dimensions | 121" x 58" x 81" |
Weight | 4,600 lbs |
2017 PO LY GIM DIAMOND 16CSBIII SWISS TYPE LATHE (Eurotech Kobra 16SLY)
MITSUBISHI M70 CNC CONTROL
MAIN SPINDLE DIAMETER: 0.67" (17MM)
MAIN SPINDLE SPEED: 200-8,000 RPM
MAIN SPINDLE INDEXING ANGLE: 0.001 DEG.
Main SPINDLE MOTOR: 3 HP / 220 v / 3 / 15 AMP
SUB/BACK SPINDLE DIAMETER: .67 (17MM)
SUB/BACK SPINDLE SPEED: 200-5,000 RPM
SUB SPINDLE INDEXING: 0.001 DEG.
MAX. LENGTH FOR FRONT EJECTION: 8.86” (225mm)
SUB/BACK SPINDLE MOTOR: 3 HP
MAX. MACHINING LENGTH per chucking: 200mm (7.87") or 80mm with rotary/live Bushing
MAX. DRILLING DIAMETER MAIN SPINDLE: 12mm (0.393")
MAX. DRILLING DIAMETER SUB SPINDLE: 0.275"
MAX. TAPPING DIAMETER MAIN SPINDLE: M10
MAX. TAPPING DIAMETER SUB SPINDLE: M6
Tooling
O.D. TOOLS: 6 (12 x 12 x 120 mm)
I.D. TOOLS: 4 (ER16)
CROSS WORKING DRIVEN TOOLING: 6 (ER16)
CROSS WORKING DRIVEN TOOLING SPEED: 200-6,000 RPM
FRONT WORKING DRIVEN TOOLING: 3 (ER-16)
FRONT WORKING DRIVEN TOOLING SPEED: 200-6,000 RPM
BACK WORKING ID TOOLING: 4 Live or 4 Static
BACK WORKING DRIVEN TOOLING:
No. of tools (slide 1): 3 (ER11)
No. of tools (post 1): 4 (ER16)
BACK WORKING DRIVEN TOOLING: 200-6,000 RPM
From OEM Brochure
The SwissTurn Y-axis slides dual-spindle Swiss type CNC auto lathe
- the ultimate for bar machining. The main performance benefi ts off ered:
■ Reduction of cycle times
■ Great rigidity to allow machining of tough materials
■ Load up to 32 cutting tools for machining of complex parts and reduce set-up times
■ Ergonomics for quick and easy access for retooling operations
■ Quick change-over from guide bushing to non-guide bushing
Short Remnant Material - With the optional Rough Material Bushing, the remnant material
can be 50mm (depending on parts length).
Replaceable Fixed/Driven Tool Holder Set - The 4-station back stationary/driven tool
holder can utilize either fixed or driven tool holders. This enables increased tooling
flexibility.
Optional flexible tool layout to offer thread whirling, hobbing and other special tools
The superior design delivers extremely effi cient and fast production of complex
parts using live tools, and Y- and C-axes.
■ Up to 16 live tools for milling ops.
■ Programmable parts catcher and conveyor system.
■ Optional deep hole drilling, up to “2 tools”.
■ Disc brakes and hydraulic clamping on main spindle and sub-spindle
for rigid milling and cutting. (20 and 25 millimeter models only)
Raw Materials Machining: The Rough Material Option allows the customer to utilize
standard bar stock without using a guide bushing. Converting from guide bushing
to non-guide bushing can be done in 10 minutes
Shipping dimensions:
Machine: 121" x 58" x 81" 4,600 lbs
Barfeed: 187" x 19" x 49" 1,210 lbs
Coolant Pan: 45" x 44" x 28" 167 lbs
Chip Cart: 39" x 25" x 33" 125 lbs