Accuway UZ-2000T2Y CNC Turn/Mill Center, New 2016
CNC Lathes (Turning Centers)Accuway UZ-2000T2Y CNC Turn/Mill Center, New 2016
Dual Turret, C-Axis on Main & Sub, Y-Axis
This is a very late model machine, current technology, with almost no cut hours
-------------------------------------------------------------------------------------------------------------------------------
Mitsubishi M800 CNC Control
Dual Turret
5,000 RPM Spindle
C-Axis on Main & Sub
Y-Axis
Toolign package: ID & OD Tool Holders and 5 Live Tool Holders
Spindle Chiller
Parts Catcher & Conveyor
Chip Conveyor & Roll Away Chip Cart
Manuals
Swing | 25.9" |
Machining Length | 31.1" |
# Axis | 5 |
Bar Capacity | 2" |
Chuck Size | 6" |
Distance Between Centers | 45.2" |
Turning Diameter | 12.6" |
Power | 25 hp |
Max RPM | 5,000 RPM |
Live Tooling | Yes |
Sub Spindle | Yes |
# of Turrets | 2 |
Control | CNC (Mitsubishi M800) |
Dimensions | 185" x 95" x 91" |
Weight | 24,251 lbs |
To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.
General Specifications:
Accuway is a renouned Taiwan machine tool builder........ www.accuway.com.tw
Capacity & Dimensions
Swing over Bed / Swing Over Cross Slide: 25.9” / 24.4” (660 / (620mm)
Cutting Diameter – Main & Subspindle: 12.6” (320mm)
Distance Between Spindle Noses: 45.2” (1150mm)
Cutting Length: 31.1” (790mm)
Main Spindle
Spindle Motor - Dual-Wound Mitsubishi 11/15kw Motor: 25-HP Peak, 20-HP 30-minute duty-rating
Spindle Speed: 5,000 RPM
Spindle Nose: A2-5
Bar Capacity (in draw tube) / Spindle Through-Hole: 2.047” (52mm)
Chuck Diameter: 6”
Sub-Spindle
Spindle Motor - Dual-Wound Mitsubishi 11/15kw Motor: 25-HP Peak, 20-HP 30-minute duty-rating
Spindle Speed: 5,000 RPM
Spindle Nose: A2-5
Bar Capacity (in draw tube) / Spindle Through-Hole: 2.047” (52mm)
Chuck Diameter: 6”
Axis
Axis Travel – X1/X2: 8.3 ” (210mm)
Axis Travel – Y1 (upper turret only): -1.5”/+2.4” (-40/+60)
Axis Travel – Z1/Z2: 33” (840mm)
Axis Travel – B-axis (sub-spindle travel): 36.2” (920mm)
Rapid Traverse Feedrate - X1, X2: 1181 IPM (30m/min)
Rapid Traverse Feedrate - Y1: 1181 IPM (30m/min)
Rapid Traverse Feedrate - Z1, Z2: 1181 IPM (30m/min)
Tool Turrets 1 & 2
Tooling System: BMT 40
Number of Tools: 16-stations each tool turret, 32-total
Square Tool Shank Size: 0.78” (20mm)
Round Tool Shank Size: 1.25” (32mm)
Driven Tool Rotary Speed / Rotary Torque (17.7 Nm): 6,000 RPM / 13 ft. lbs. torque
Specifications
Power Requirements – 64 Kw: 220vac ±5%, 160-amps full-load
Machine Dimensions: 185” x 95” x 91” (+ 25” for chip conveyor)
Machine Weight: 24,251 lbs. (11,000kg)
==============================================================================
NOTE: MACHINE PARTS FOR THIS MACHINE CAN BE PURCHASED THROUGH EXPAND MACHINERY,
THE MITSUBISHI CONTROL CAN BE FULLY SERVICE BY MITSUBISHI ELECTRIC