| X-Axis | 27.95" |
| Y-Axis | 17.71" |
| Z-Axis | 18.11" |
| # Axis | 3 |
| Control | CNC (Fanuc 0iMF) |
| Dimensions | 86" x 81" x 113" |
| Weight | 10,582 lbs |
To the best of our knowledge all details listed below are deemed correct.
It is the buyers responsibility to confirm ALL details prior to purchase.
Axis Travel
X-Axis: 27.95" 710mm
Y-Axis: 17.71" 450mm
Z-Axis: 18.11" 460mm
Spindle to Rotary Table Surface: 5.11-23.62" 150-600mm
Spindle Center to Z Way Covers: 17.71" 450mm (Troat)
Table
Table Size: 29.92" x 16.53"760mmx420mm
T-Slot Width (3 T-Slots Total): 18mm 100mm Centers
Table Load: 2205 lbs 1000 kgs load
Spindle
Spindle Motor: 20 HP S3 Power 15HP 30-Min
Spindle Speed: 12,000 RPM
Tool Type: CAT #40 Taper
Retention System/Holding Capability BellVille Spring Stack (1650-1760 lbs)
Spindle Runout: <0.000040" TIR
Spindle Bearings - Rear: 95mm NSK70BNR 2-P4 Class 7 Bearing
Spindle Bearings - Front: 95mm NSK70BNR 2-P4 Class 7 Bearing
Retention Knob: C40-4502H (Coolant)
Axis Feeds
Rapid Traverse (X,Y,Z): 1,417 IPM 36m/minute
Cutting Feedrate: 0.02-393 IPM 10m/minute
Axis Drive Motor Power (X,Y/Z): 2.7/4.0 HP 2.0/3.0kw
Ballscrews (X,Y,Z): 32mm Ballscrews12mm Pitch
Least Input Command Increment: 0.0001"/0.000040"0.001mm(40 Millionth)
Accuracy X,Y,Z Axis (JIS6338): +0.0002"/12" +0.005mm Over 300mm
Repeatability X,Y,Z Axis (JIS6338): +0.0001"/12" +0.003mm Over 300mm
Tool Changer
Tool Capacity (24+1): 30 Tool Twin ArmChain Drive Rack
Tool Shank: CAT#40 Taper
Tool Change Time: 1.7 Seconds Tool to Tool
Tool Diameter / w/adjacent tool: 5.90" / 3.15" 150mm/80mm
Tool Length/Weight (from gage line): 11.81" / 15 lbs300mm/7Kg
Tool Selection/Tool Access Random Bi Direction:
General
Coolant Capacity: 68-Gallons 256 Liters
Electrical - Connected Load: 50 amps 220vac+5%, 60hz
Air Service Requirements: 85 PSI @ 14-scfm
Machine Dimensions: 86" x 81" x 113"
Machine Weight: 10,582 lbs
Warranty: 1-year machine warranty 3-year Mitsubishi control, motors, & drive warranty
*Machine Options*
GEN MILL-2818 3-Axis VMC Production Package: $94,990.00
Gen Mill- 2818 5-Axis VMC Grand Package: $124,990.00
6" Index Tilt-Rotary Head
Complete Package Includes: 6.25" Face Plate
4th & 5th Axis Positional Indexer, Complete with Dual Axis Servo Box
Renishaw Probe Package
-OMP60/OTS/CAT40 Hardware and Software Kit Installed
Factory machine installation: "Peace-of-Mind Factory Installation" - Includes
Expenses: $3,995.00
Factory On-Site 3-Day Machine Operation and Program Training - Includes
Expenses: $5,995.00
15,000 RPM Spindle Speed Upgrade: $6,495.00
20,000 RPM spindle speed upgrade
HSK-63, 30-HP 30-min rated, 87 ft. lbs. torque: POR
Heidenhain Linear Scales for All 3-Axis - Installed: POR
Renishaw OMP60/OTS/CAT40 Hardware and Software Kit installed: $10,990.00
“A” and “C” Axis Rotary Glass Scale Feedback Option for 5-Axis Packages: $9,990.00
