2005 Tsugami BU-26SY AUTOMATIC SCREW MACH., SWISS TYPE, N/C & CNC | Automatics & Machinery Co., Inc.
Stock #:
For Sale

2005 Tsugami BU-26SY CNC Swiss Gang Slide/Turret Lathe with LNS Express Bar Feed, HPC, Tooling,

Equipped With

Fanuc 18iTB2 CNC Control Full C Axis Control on Main Spindle C Axis Indexing on Sub Spindle (5 Degree Resolution) Chip Blaster J4BW1SS 5-Channel High Pressure Coolant System (M Code Controlled) LNS Hydrobar Express 332 Bar Loader Probably a 29mm and a 17mm channel set (to be confirmed) Collets and Guide Bushings Included Mayfran Side Discharge Chip Conveyor Machine Leveling Pads. All Available Books & Manuals. Misc Tool Holders, Collets and Guide Bushings Including Some offset Tool Holders on Turret and a Single & Double Offset Holder in the photos Two machines shown - Only one available (other has been sold)

Power7.3 hp
RPM5,000 RPM
# Axis8
Swiss, Chucker or Convertible?Swiss
Main Spindle IndexingFull C
Sub Spindle Indexing5 degree
Live Back Working Tools?Yes
ControlCNC (FANUC 18ITB2)
Dimensions133" x 83" x 101"
Weight12,100 lbs

To the best of our knowledge all details listed below are deemed correct. It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase. General Specifications: Main Spindle Bar Capacity: 1.000" Turning Lengths: 9.842 " per Stroke Indexing Increments: Full C-Axis (.001 deg) Speeds: 6000 RPM Sub-Spindle Bar Capacity: 1.000 " Speed: 200 - 5000 Drive Motor: 7.3 hp Index Increment (Degrees): 5° Indexing (C Optional) Axis Specifications STD. Number of Axes: 8 Axis/ Travel/ Traverse rate/ Feed rate X1 (STD.) 1.378 Inch 472 IPM 236 IPM Z1 (STD.) 9.842 Inch 944 IPM 236 IPM C1 (STD.) 360.000 Deg. Y1 (STD.) 9.448 472 IPM 236 IPM X2 (STD.) 4.330 Inch 472 IPM 236 IPM Z2 (STD.) 5.511 Inch 944 IPM 236 IPM Y2 (STD.) 3.149 Inch 393 IPM 236 IPM Z3 (OPT.) 11.220 Inch 944 IPM 236 IPM Live Tool Speed: 5000 RPM Live Tool Motor: (HP): 15.0 Type/ Gang-Slide/ Turret -Max. number of tools Turning 7 8 Rotary 2 4 Square 0.500 " Round 0.750 " 1.000 " Rotary 0.250 " 0.500 " Rotary tooling Horse power .7 1.9 Speed 8000 rpm 5400 rpm There are a number of tools offered that allow for 2 - 4 tools on one holder On-Center Mill Drill Standard with 'C' Axis Off-Center Mill Drill Standard with 'Y' Axis Floor layout: Length: 137 " x Width: 80 " x Height: 69 " The Tsugami BU26Y (1" capacity) is a benchmark that sets the rules for power, rigidity, and longevity; it is the future of the Swiss-type machine technology. * Now, taking advantage of new control technology with Fanuc 18iT control, increased power and drives it's more efficient than ever. * A wide assortment of driven tools for the rear turret driven tool stations is available, also included are driven cross tools on the front slide, making this the most flexible of models. * An 8-station turret (3-axis), plus an independent gang tool slide with driven tools permits many simultaneous functions. Balanced turning, balanced threading, simultaneous front and back working. * Standard are a 15hp main spindle, 7.5hp sub-spindle with through feed capability, 8-axis including x1,x2,z1,z2,z3, and y. Excellent for complex machining. Machine: 133" x 83" x 101" 12,100 lbs Coolant/Chip Pan: 80" x 62" x 23" 250 lbs

2005 Tsugami BU-26SY CNC Swiss Gang Slide/Turret Lathe (spindle brake was not operational)

2005 Tsugami BU-26SY CNC Swiss Gang Slide/Turret Lathe (spindle brake was not operational)