NEW Ganesh GMV-4 Super Precision Milling Machine
MILLERS, VERTICALNEW Ganesh GMV-4 Super Precision Milling Machine
(5-HP Spindle & Hi-Torque 1.5-HP knee powerfeed included with each machine
Motorized Knee Power Feed
$1,295 Value – Standard Included Feature
Spring Loaded Way Covers
$ 495 Value – Standard Included Feature
2-Cooling Fans in Spindle Head
$ 395 Value – Standard Included Feature
Halogen Work Light
$ 395 Value – Standard Included Feature
Automatic Lubrication System
$ 295 Value – Standard Included Feature
Coolant Pump & Nozzle
$ 495 Value – Standard Included Feature
Coolant & Chip Tray
$ 295 Value – Standard Included Feature
Table-W | 12" |
Table-L | 54" |
Travel-Long | 36" |
Travel-Cross | 16" |
Power | 5 hp |
RPM | 0 RPM |
Taper | NT#40 |
Dimensions | Width – 54” Depth – 66” – Height – 92” |
Weight | 3520 |
Featuring:
Class-7 Super Precision Fafnir Spindle Bearings
5-Horsepower Variable Speed Head
80 - 4,000 RPM Spindle Speeds (5,000 RPM Inverter Spindle Optional)
Square Box Ways on Knee & Column - Y & Z Axis
1.5-Horsepower Knee Power Feed Motor
Automatic Lubrication System for Slideways and Leadscrews
Hard-Chrome Plated Quill
40-Taper Spindle
1-Year Warranty
General Specifications As Per Brochure (must be verified by buyer):
STANDARD GANESH GMV-4 MACHINE SPECIFICATIONS:
TABLE:
Table Size: 12" X 54" (254mm X 1372mm)
Table Travel / (With Power Feed): 36" (914mm) / 32" (812mm)
Table Capacity: 1200 lbs
T-slot width (3 Ground T-Slots): 5/8" with ground reference edges
(15.9mm wide)
MACHINE TRAVELS & CAPACITY
Table Travel - X axis/(With Power Feed):36" (914mm) / 32" (812mm)
Cross Travel - Y axis: 16" (400mm)
Knee Travel - Z axis: 16" (406mm)
Ram Travel: 17.7" (450mm)
Spindle Nose-to-Table TravelL: 2" - 18" (50 - 457mm)
Quill Travel - Manual & Power Feed: 5" (127mm)
Quill feeds - With Trip Release: 0.0015", 0.003", 0.006" (0.038mm
0.076mm, 0.152mm)
Quill Diameter: 4.13" (105mm)
Leadscrews with ground pitch (X & Y): 200" per rev. (5mm) (ballscrews
available)
Adjustable scale ring resolution: 0.001" (0.0254mm)
Slide Ways: Hardened & Ground Meehanite Cast Iron
Longitudinal Table - Z Axis: Hardened & ground dovetail ways
Cross Slide to Knee - Y Axis: Hardened & ground square box ways
Knee to Column - Z Axis: Hardened & ground square box ways
SPINDLE HEAD
Head tilt (Left-to-Right): 90 - 0 - 90 degrees
Head tilt (Front-to-Back / Up-Down): 45 - 0 - 45 degrees
Head Swivel: 360-degrees
Spindle Motor: 5-HP, 3-Phase 208-240 vac
(5-HP option)
Spindle Taper: 40-taper
Spindle Runout: 0.0002" maximum runout (0.005mm)
Spindle Bearings: Fafnir ABEC-7 matched set of
Class-7 bearings
Variable Speed Drive - Dual Range: 80 - 520 rpm (low-range) /
600 -4000 rpm (high-range)
Note: 5,000-RPM Electronic Variable-Speed Spindle available with the optional
AC Inverter Spindle Head
DIMENSIONS & WEIGHT
Power Requirements: 3-Phase 220 vac @ 44-amps
(440 vac optional)
Coolant Capacity: 11-Gallons (41 liters)
Machine weight: 3528 lbs
THESE BASIC ACCESSORIES ARE INCLUDED WITH EACH MACHINE - A $3,500 VALUE
Motorized Knee Power Feed $1,295 Value
Spring Loaded Way Covers $ 495 Value
2-Cooling Fans in Spindle Head $ 395 Value
Halogen Work Light $ 395 Value
Automatic Lubrication System $ 295 Value
Coolant Pump & Nozzle $ 495 Value
Coolant & Chip Tray $ 295 Value
(Hi-Torque 1.5-HP knee powerfeed included with each machine)
For full quote with option list & pricing details, etc, please open the
attached pdf file.