New 2023 Expand Machinery GENMILL 4024 Vertical Machining Center 3-Axis Package
Vertical Machining CentersNew 2023 Expand Machinery GENMILL 4024 Vertical Machining Center with 3-Axis Package,
Mitsubishi M830 CNC Control
40 Station ATC Upgrade
Detron 8" Trunnion
*(Stock Machine Only – Optional Glass Scales Available for Trunnion)*
Renishaw Probe Set
Chip Conveyor
12,000 RPM Direct-Drive Beltless Spindle
Belt Type Chip Conveyor with 38” Barrel Height Discharge
Big-Plus Dual-Contact High-Performance Precision Spindle
300 PSI “Through-the-Spindle” Coolant with Rotary Union
32-GB Solid-State Data Server Integral to CNC Control
Chip Wash- Down System
Full Machine Enclosure w/Top Covers & Precut Exhaust Duct
Spindle Air Blast by M-Code
Spindle Oil Cooler – Thermostatically Controlled (machine mounted)
Remote Operator MPG Hand Wheel with Magnetic Base Mount
High-Speed Synchronous Rigid Tapping
4th and 5th Axis Prewired with Quick-Disconnect Connectors
Dual High-Intensity LED Worklamps
6 - Thru-Tool-Coolant Pull Studs
X-Axis | 40.55" |
Y-Axis | 23.62" |
Z-Axis | 25.59" |
# Axis | 3 |
Power | 25 hp |
RPM | 12,000 RPM |
Taper | CT 40 - Big Plus |
# ATC | 30 |
Table-W | 45.66" |
Table-L | 19.68" |
Control | CNC (Mitsubishi M830) |
Dimensions | 115" x 82" x 116" |
Weight | 15,708 |
To the best of our knowledge all details listed below are deemed correct.
It is the buyers responsibility to confirm ALL details prior to purchase.
General Specifications:
Axis Travel
X-Axis: 40.55" (1,030mm)
Y-Axis: 23.62" (600mm)
Z-Axis: 25.59" (650mm)
Spindle to Rotary Table Surface: 5.11-30.56" (130-775mm)
Spindle Center to Z Way Covers: 22.83" (580mm) (Throat)
Table
Table Size: 45.66" x 19.68" (1,160mmx500mm)
T-Slot Width (3 T-Slots Total): 18mm 100mm Centers
Table Load: 3530 lbs (1600 kgs load)
Spindle
Spindle Motor: 25 HP S3 Power 20HP 30-Min
Spindle Speed: 12,000 RPM
Spindle Torque: 90 ft-lb @ 1,500 RPM
Tool Type: CAT #40 Taper
Retention System/Holding Capability BellVille Spring Stack (1650-1760 lbs)
Spindle Runout: <0.000040" TIR
Spindle Bearings - Rear: 110mm NSK70BNR 2-P4 Class 7 Bearing
Spindle Bearings - Front: 110mm NSK70BNR 2-P4 Class 7 Bearing
Retention Knob: C40-4502H (Coolant)
Axis Feeds
Rapid Traverse (X,Y): 1,417 IPM (36m/minute)
Rapid Traverse (Z): 1,260 IPM (32m/minute)
Cutting Feedrate: 0.02-393 IPM (10m/minute)
Axis Drive Motor Power (X,Y/Z): 5.0 HP (3.5kw)
Ballscrews (X,Y,Z): 40mm Ballscrews 12mm Pitch
Least Input Command Increment: 0.0001"/0.000040 ("0.001mm/40 Millionth)
Accuracy X,Y,Z Axis (JIS6338): +0.0002"/12" (+0.005mm Over 300mm)
Repeatability X,Y,Z Axis (JIS6338): +0.0001"/12" (+0.003mm Over 300mm)
Tool Changer
Tool Capacity (30+1): 30 Tool Twin ArmChain Drive Rack
Tool Shank: CAT#40 Taper
Tool Change Time: 1.7 Seconds Tool to Tool
Tool Diameter / w/adjacent tool: 5.90" / 3.15" (150mm/80mm)
Tool Length/Weight (from gage line): 11.81" / 15 lbs (300mm/7Kg)
Tool Selection/Tool Access Random Bi Direction
General
Coolant Capacity: 97-Gallons/300 PSI (256 Liters)
Electrical - Connected Load: 220vac+5%, 60hz (50 amps)
Air Service Requirements: 85 PSI @ 14-scfm
Machine Dimensions: 115" x 82" x 116" (306 x 231 x 256cm)
Machine Weight: 15,708 lbs (7,120 kg)
Machine Options:
Factory machine installation: “Peace-of-Mind Factory Installation” – includes expenses ......$3,995.00
Factory on-site 2-day machine operation and program training – includes expenses ............$5,995.00
15,000 RPM Spindle Upgrade.................................................................. $6,495.00
40-Tool Chain-Drive Tool Changer Upgrade ....................................................$9,995.00
Heidenhain linear scales for all 3-axis - installed.......................................... P.O.R.
Fanuc OiMF CNC Control ......................................................................$6,995.00
Renishaw OMP60/OTS Hardware and Software Kit installed...................................... $10,990.00
“A” and “C” Axis Rotary Glass Scale Feedback Option for 5-Axis Packages..................... $9,990.00
(Recommended for high accuracy work)
4th Axis Rotary Table
Detron 8" completed package includes Rotary Table............................................$17,490.00
Air brake
Braided Steel air hose, Accessories
8" 3 Jaw powerful scroll chuck with flange
Manual clamp with quill tailstock
4th Axis external cables 2 m cables from the table to the bulkhead
With Mitsubishi motor and drive installed.
GEN MILL 4024 5-Axis (4+1) VMC Grand Package ................................................$154,990.00
Includes: Detron 8” Trunnion
Renishaw RTS-QE/RMP 400/RMI-Q Radio Probe Package
Warranty – 1-Year Machine Warranty / 3-Year Mitsubishi Control, Motor & Drives Warranty
Machines Need Stable 220 Volts, 3 Phase – Please Use Appropriate Transformers or Voltage Stabilizers.
*Stock Machine Only – Optional Glass Scales Available for Trunnion*