New 2021 Ganesh GenMill-7039 Vertical Machining Center
Vertical Machining CentersNew 2021 Ganesh GenMill-7039 Vertical Machining Center
Mitsubishi M830 CNC Control - Features NANO Processing with 2700-Block Look-Ahead
Belt Type Chip Conveyor with 38” Barrel Height Discharge
Big-Plus Dual-Contact High-Performance Precision Spindle
40 -Tool Twin-Arm Chain-Driven Tool-Changer
300 PSI “Through-the-Spindle” Coolant with Rotary Union
Chip Wash Down System
Twin Chip Augers to Push Chips Forward
Full Machine Enclosure w/Top Covers & Precut Exhaust Duct
32-GB Solid-State Data Server Integral to CNC Control
Spindle Air Blast by M-Code
Spindle Oil Cooler – Thermostatically Controlled
Coolant Oil-Separator to Control Coolant Contaminants
4th and 5th Axis Prewired with Quick-Disconnect Connectors
Dual High-Intensity LED Worklamps
Machine Condition Display Signal Lamp
6 - Thru-Tool-Coolant Pull Studs
X-Axis | 70.86" |
Y-Axis | 39.37" |
Z-Axis | 35.43" |
# Axis | 3 |
Power | 35 hp |
RPM | 12,000 RPM |
Taper | CT 40 |
# ATC | 40 |
Table-W | 76.77" |
Table-L | 35.43" |
Pallets? | No |
Control | CNC (Mitsubishi M830) |
Dimensions | 193" x 131" x 142" |
Weight | 44,092 lbs |
To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.
General Specifications:
AXIS TRAVEL
X-Travel: 70.86” (1,800mm)
Y-Travel: 39. 37” (1000mm)
Z-Travel: 35.43” (900mm)
Spindle Nose to Table Surface: 9.8”– 45.27” (250 – 1150mm)
Spindle Center to Z-Axis Covers: 41.53” (1055mm (throat dimension)
TABLE
Table Size (L x W): 76.77” x 35.43” (1,950mm X 900mm)
T-Slots: - 5 Total 22mm Slot Width on 160mm Centers
Table Load: 6,600 lbs. (3000 kgs load)
SPINDLE
Spindle Motor – S1/S2=22/26 kW: 50-Horsepower Peak / 35-HP 30-Minute Duty-Rating
Spindle Speed: 12,000 RPM (15,000 – 20,000 RPM Optional)
Tool Type: CAT #40 Taper (CAT/BT #40 & #50 Taper Optional)
Retention Knob (Pull Stud): C40-4502H (Coolant) Japanese Standard
Spindle Taper Material / Hardness: SCM415 / HRC58-62
Retention System / Holding Capability: Bellville Spring Stack - 1650-1760 lbs
Spindle Runout: 0.000040 T.I.R.
Spindle Bearing Front: 110mm NSK 70BNR - 10 x 2, P4 Class-7 Bearings
Spindle Bearing Rear: 110mm NSK 70BNR - 10 x 2, P4 Class-7 Bearings
AXIS FEEDS
Accuracy X, Y, & Z Axis (JIS6338): ± 0.0002” - 12” (± 0.005mm over 300mm Travel)
Repeatability X, Y, & Z Axis (JIS6338): ± 0.0001” - 12” (± 0.003mm over 300mm Travel)
Least Input Command Increment: 0.0001” - 0.000040” (0.001mm (40-Millionths in Metric)
Rapid Traverse (X/Y): 590 IPM (15 MPM)
Rapid Traverse (Z): 472 IPM (12 MPM)
Cutting Feedrate: 0.02 - 393 IPM (10 MPM)
Axis Drive Motor Power (X/Y): 9.4-HP (7kw)
Axis Drive Motor Power (Z): 9.4-Hp (7kw w/ Brake)
Ballscrews (X/Y/Z): 63mm Ballscrews 10mm Pitch
TOOL CHANGER (Specifications Change with 50-Taper Option)
Tool Capacity: 40 + 1 Tool - Twin-Arm / Chain Drive
Tool Shank: CAT#40 Taper / (CAT#50, BT#40/50 optional)
Tool Change Time: 4.3-Second Tool-to-Tool
Tool Diameter (w/ Adjacent Tool): 5.90”, 3.15” (150mm, 80mm)
Tool Length: 11.81” (300mm)
Tool Weight: 15 lbs. (7kg)
Tool Selection / Tool Access: Random access / Bi-directional
SPECIFICATIONS
Air Service Requirements: 85 psi @ 14-scfm
Coolant Capacity: 172 Gallons (650 Liters)
Connected Load Electrical Requirement: 220vac ±5%, 60-Hz (365 KVA, 100mps)
Floor Space Requirements Recommended: 193” x 131” x 142” (490 x 332 x 360cm) (Add 47” for Conveyor)
Shipping Dimensions (L x W x H): 217” x 146” x 150” (550 x 370 x 380cm)
Machine Weight: 44,092 LBS (20,000 kg)
*Machines need stable 220 Volts, 3 Phase – Please use appropriate transformers or voltage stabilizers.*
AVAILABLE MACHINE OPTIONS
Factory Machine Installation: “Peace-of-Mind Factory Installation” – Includes Expenses:..$4,995.00
Factory on-site 3-day Machine Operation and Program Training – Includes Expenses:........$4,995.00
Substitute #40-Taper 8,000 RPM 2-Speed ZF Geared-Head Spindle:...........................$5,295.00
Substitute #50-Taper 8,000 RPM Geared-Head Spindle:......................................$15,795.00
Substitute #50-Taper Direct-Drive 10,000 Spindle:........................................$15,795.00
Heidenhain Linear Scales for all 3-Axis:.................................................$23,695.00
Renishaw OMP60/OTS/CAT40 Hardware and Software Kit Installed:............................$8,990.00
Fanuc 0iMF Control and Drive Package is Available with 2-Year Warranty:..................$6,995.00