2010 EDGE PATRIOT 551 BAR LOADER/MAGAZINE TYPE,HYDRAULIC & MECHANICAL | Automatics & Machinery Co., Inc.
Overview
Type:
BAR LOADER/MAGAZINE TYPE,HYDRAULIC & MECHANICAL
Manufacturer:
EDGE
Model:
PATRIOT 551
Condition:
Used - Good
Year:
2010
Stock #:
402817
Status:
For Sale
Description

Edge Technologies Patriot 551 Automatic Bar Loader, Full 6' bar cap, New 2011 Can load up to 8' bars

Equipped With

Configured with a 45mm Channel set (additional channels can be purchased, Price on request) New Replacement $38K Originally on an Okuma Spaceturn LB3000EX, will configure to any CNC Turning Center

Specifications
Capacity2"
Bar Length8'
Length of Spindle Type?No
Synch for Sliding Headstock?No
Axial Shift?No
Dimensions128" x 28" x 49"
Weight2200#

To the best of our knowledge all details listed below are deemed correct. It is the buyer's responsibility to confirmed prior to purchase. General Specifications per Manufacturer Bar Capacity: No Prep: 5mm to 44.5mm (.196" to 1.75") With Prep: 5mm to 51 mm (.196" to 2.000") Maximum Bar Length: 8' Minimum Bar Length: 39.4" Maximum Remnant Length: 16" Magazine Rack Capacity: 12" Bar Loading Cycle: 30 seconds for 12' bar Material Straightness Specifications: .007"TIR/ft of material (V Blocks, 3 points equidistant) Feed Force (pusher torque): max 450N, adjustable Foward Feed Rate: 750 inches/min max, adjustable Return Feed Rate: 1000 inches/min max, adjustable Power Consumption: 1.5kW Operating Voltage: 230V/60 Hz - 3 phase Control Voltage: 24V DC Oil Capacity: 57 liters (15 gallons) Oil Viscosity: ISO 150cST Compressed Air Supply: 6 bar (90 psi) Compressed Air Consumption: approx. 8 liters/loading cycle Barfeed: 128" x 28" x 49" 2,100 lbs

Edge Technologies Patriot 551 Automatic Bar Loader, Full 6' bar cap, New 2011

Edge Technologies Patriot 551 Automatic Bar Loader, Full 6' bar cap, New 2011
BAR LOADER/MAGAZINE TYPE,HYDRAULIC & MECHANICAL