KSI SQC-38 CNC Swiss Lathe, 2006
CNC Swiss Lathe
KSI SQC-38 CNC Swiss Lathe, New 2006
Control Fanuc 18-iTB (7-axis)
Iemca Boss 551E Magazine Barfeed w/signal light s/n A05082301
w/ 43 & 28mm Guide Channels & pusher sets
Parts Catcher
Parts Conveyor
Sub Spindle Ejector
All Live Spindles Have Rigid Tap
9 Live Tool Capable (Installed Live Tools; 4 Cross/2 Face/2 BW)
Misc Collets & Guide Bushings (see below) list to include the follow
(List may not be exact):
used collets TF48/B42:
7/16" HX (2) 1/2" (3) 35/64"
.866" .884" .884"EN 1" 1"EN
1.038" 1-3/16" 1-1/4" 1-1/2" 1-1/2"EN
used guide bushing TD38:
5/16" 5/16"XP (2) 3/8" 7/16"HX (2) 1/2" 5/8" 11/16" 3/4"
1" 1-1/16" 1-1/8" (2) 1-1/4" 1-1/2"(St)
****
Options, ask for quotes for the following:
High pressure coolant system by ChipBlaster
LNS Turbo Chip Conveyor, standard or MicroFilter type
Tooling for your part set-up
| Capacity | 1.5" |
| Power | 7.5 hp |
| RPM | 8,000 RPM |
| # Axis | 7 |
| Control | CNC (FANUC 18ITB) |
To the best of our knowledge all details listed below are deemed correct.
It is the buyers responsibility to confirm ALL details prior to purchase.
Main Spindle
Max Bar Diameter 38mm (1.5")
Max Machining Bar Length (1) Chucking 8.26"
Main Drill/Tap 12mm/M10
Cross Drill/Tap 10mm/m8
Main Spindle Positioning C Axis .001"
Main Spindle Speed 8,000 RPM
No. Main Spindle Turning Tools (Fixed) 5 Standard
Tool Shank Size 12mm
Main Spindle Cross Live Tools (Live) 4 Standard
No. Y Axis Tool Block (Fixed) 5 Standard
Headstock Collett TF 48
Guide Bushing Capacity 1 1/2" (TD38S)
Sub Spindle
Sub Spindle Chucking Diameter 38mm
Sub Spindle Speed 8,000 RPM
Sub Spindle Positioning C Axis .001"
Back-end Face Drill/Tap 10mm/m8
Spindle RPM Mill/Drill Main & Sub 8,000 RPM
Back Working Live Spindle Mill/Drill 4,000 RPM
No. Face Tools (Sub Spindle) (Fixed) 1 Standard
No. Face Tools (Sub Spindle) (Live) 2 Standard
No. Face Tools (Back End) (Live) 3 Standard
No. Face Tools (Back End) (Fixed) 1 Standard
Sub Spindle Collet TF 44
Total No. of Fixed Tools 12 Standard
Total No. of Live Tools 9 Standard
Total No. of Tools 21 Standard
Mechanical Driven Rotary Guide Bushing Standard
Main Spindle Horsepower 7.5 HP
Sub Spindle Horsepower 3.5 HP
Cross Drill/Mill Unit 1.5 HP
Back End Face Tools 1.3HP
Machine Electronics 220/3/60
Machine: 97" x 62" x 77" 9,500 lbs
Chip/Coolant Pan: 52" x 48" x 15" 500 lbs
Barfeed: 192" x 26" x 53" 2,000 lbs
