New Lexair Mini Rhinobar Hydrodynamic Bar Feed
Hydraulic Bar FeedsNew Lexair Mini Rhinobar Hydrodynamic Bar Feed
Capacity | 1.625" |
Bar Length | 12' |
GENERAL SPECIFICATIONS AS PER BROCHURE
Bar Capacity: 1/16" - 1 5/8"
Maximum Bar Length: 12'
Motor: 1 hp / 1,725 rpm
Electrics: 208/220/440 3 phase
Overall Length: 17'
Pump Motor: 1 hp
220/440 volts/3phase
Machine Features:
(3) Feed Tubes (customer to select sizes)
Engineered for Swiss type CNC screw machines & small headstock lathes
Feed tube change-over in 5 minuts
Standard Z-axis capability
Positive, pusher retention system
Heavy duty construction for max rigidity & vibration prevention
Unique swing-out mechanism
Removable pendant for convenient operator control
Hydraulic system requires 15 gallons of Pennzoil AW-100 hydraulic oil
or equipment (supplied by customer)
Pries subject to change without notice ***
MRB 1.62 - 12' 1⁄8” - 15⁄8” x 12’ $18,985.00
MRB 1.62 - 6' 1⁄8” - 15⁄8” x 6’ $18,485.00
Additional feed tubes (available in 1/8" increments from 1/4" - 1 5/8"
1/4",5/16",3/8",1/2",5/8",3/4",7/8",1",1-1/16",1-1/8"
1-1/4",1-3/8",1-1/2",1-5/8"............................$1,650.00 each
1/8" & 5/32" feed tube kit.............................$2,900.00 each
Optional spindle liners (each spindle liner size is priced as follows):
** note: prices based onlathe draw tube i.d., not stock size
1/4" thru 1-5/8".......................................$675.00 each
** note: all bar stock must have a 30 degree chamfer cut on the pusher
to achieve the highest performance.
Optional custom electrical cable package with plugs:
required if OEM interface includes special plugs instead of terminal
strip................................................$490.00 each
Optional front mounted safety switch:
for use on swiss screw machine applications............$695.00 each
Electrical lathe interface:
lathe must have programmable open & close of chuck and an appropriate
interface provided by the lathe manufacturer.
Optional Step Down Transformer for Lathes Operating on 440V. $900.00
Installation.................................................$4.000.00
Includes: Set-up and leveling of the bar feeder, alignment with lathe
spindle and bolting to floor (bolts included), electrical
connection to lathe, (interface supplied by builder), training
and run-off of the bar feeder. proper training and run-off
depend on the lathe being operational, tooled & programmed, as
well as stock & machine operator being available.
Note: Additional time, travel & expenses caused by customer, dealer or OEM
delays will be billed at $180/hour on site, $100/hr travel plus
expenses.
Delivery: 6ft. approx 3-4 weeks
12ft. aaprox 3-4 wees