Doosan NHP 4000 Horizontal Machining Center, New in 2019

To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.

General Specifications:

Capacity
X-Axis Travel: 22.047"
Y-Axis Travel: 25.196"
Z-Axis Travel: 25.984"
Table Loading Area: 15.75" x 15.75"
Table Load: 880 lbs
Part Diameter: 24.8"
Part Height: 35.43"

Indexing Table and Pallet Changer
Indexing (Standard): 1 Degree
1-Degree Table Positioning Accuracy: +/- 3"
1-Degree Table Repeatability: +/- 1"

Indexing Time (Includes Clamp/Unclamp)
0-90 Degrees: 1.1 seconds
0-180 Degrees: 1.45 seconds
0-270 Degrees: 1.83 seconds
0-360 Degrees: 2.18 seconds

Pallet Surface (Standard, No Center Bushing): (24) M16 x 2.0 Tapped Holes
Changing Method: Rotary Shuffle
Pallet Change Time: 8 Second

Motion:
X-Axis Rapid Traverse Rate: 2,362 IPM
Y-Axis Rapid Traverse Rate: 2,362 IPM
Z-Axis Rapid Traverse Rate: 2,362 IPM
X/Y/Z - Axis Acceleration: 1G
Cutting Feed Rate: .04-2,362 IPM
X-Axis Feed Thrust (Continuous): 2,113 lbs
Y-Axis Feed Thrust (Continuous): 1,551 lbs
Z-Axis Feed Thrust (Continuous): 2,113 lbs
Positioning Accuracy (Full Stroke): +/- .00015"
Repeatability: +/- .000060"

Spindle
Spindle Nose to Pallet Center: 3.15" - 29.13"
Spindle Center to Pallet Top: 3.15" - 28.346"
Big Plus Spindle System: CAT 40 Big Plus
Spindle Speed: 15,000 RPM
Spindle Motor (S3 25%): 25 / 49.6 HP
Spindle Torque (S3 10%): 223.6 ft-lbs
Spindle Acceleration / Declaration Time: 1.5 Seconds / 1.99 Seconds

Automatic Tool Changer Specifications (Drum Type)
Number of Positions: 60
Tool Selection: Random Access
Tool Call Time: 2.9/5 Seconds (Nearby/Furthest)
Pull Stud: 711-23
Tool Diameter (w/ Empty Adjacent Pods): 2.9" / 6.69"
Tool Length: 17.71"
Tool Weight: 26.45 lbs

Tool Change Time (Tool to Tool, Less Than 16.5 lbs): .9 Seconds
Tool Change Time (Tool to Tool, More Than 16.5 lbs): 1.3 Seconds

Tool Change Time (Chip to Chip, Less Than 16.5 lbs: 2.3 Seconds
Tool Change Time (Chip to Chip, More Than 16.5 lbs: 2.7 Seconds

Power Required: 80 kVA / 210 amps @ 220V
Voltage Required: 205-235 Volts / 3 Phase

Machine Dimensions: 195" x 90.55" x 105.9"
Machine Weight: 9,700 lbs