To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.

Stations:
1:Load Station
2:Ultrasonic Immersion Rinse
3:Ultrasonic Immersion Rinse
4:Recirculating Hot Air Dry
5:Unload Station

General Specifications:
Working Tank
(Polypropylene)
Dimensions: 18" X 18" X 20" (18" liquid depth)
[Left to Right X Front to Back X Depth X Liquid Depth]

Outer Tank
(Stainless Steel)
Dimensions: 20" X 20" X 21" (19" liquid depth)
[Left to Right X Front to Back X Depth X Liquid Depth]

Process: DI water, DI water, Hot air dry
Chemistry: Station #2 and #3 - Deionized Water
Automation: Model CTS-2000

Facilities:
2-3 GPM DIW @1-2 Mohm, 30-35 psi and process
temperature, 30-35 CFM CDA @ 30 psi, 1-2 CFM shop air @
60 psi, unrestricted floor drain.

Power Requirement: 240Volts /3 phase /60Hz /78Amps
Work Flow: Left to Right
Frame Material: Type 304 stainless steel support frame with leveling legs

Access Panels
• Type 304, lift-out access panels on the sides and rear
• Type 304, #4 finish, stainless steel sliding access doors
on the front

Countertop
A type polypropylene removable countertop.
• The countertop will be fitted with removable
polypropylene drainbacks (between the process
stations).
Base plate: A type 304 stainless steel base plate

Rigibot CTS-2000-AB
Control: Allen-Bradley
Capacity: 200 lbs
Travel Speed (Horizontal/Vertical): 100 / 17 FPM
Positioning Accuracy (Horizontal/Vertical): +/- 0.36" / +/- 0.2"

Machine Dimensions: 113" x 40" x 48"
Machine Weight: 3,100 lbs