Sold

Kingston HJ-1100 Engine Lathe, New in 1995

LATHES, ENGINE_See also other Lathe Categories
Manufacturer:
KINGSTON
Model:
HJ-1100
Year:
1995
Stock #:
604006
Kingston HJ-1100 Engine Lathe, New in 1995
Swing19"
Centers43.5"
Spindle Bore2.25"
Power7.5 hp
RPM2,000 RPM
Swing Over Cross Slide10.6"
Dimensions90" x 41" x 57"
Weight3,520 lbs

To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.

General Specifications:
Swing Over Bed: 17"
Swing Over Cross Slide: 10-9/16"
Swing in Gap: 24"
Distance Between Centers: 43.5"
Width of Bed: 11.75"
Gap Width in Front of Face Plate: 5-7/8"
Height of Center from Leg Bottom: 42-3/8"
Spindle Through Bore: 2-1/4"
Taper of Spindle Bore and Center: MT-6 | MT-4
Type of Spindle Nose: D1-6
Number of Spindle Speeds: 12
Range of Spindle Speed: 35 - 2,000 RPM
Number of Feed Changes: 16
Range of Feeds per Revolution - Longitudinal: .0012 - .039"
Range of Feeds per Revolution - Cross: .0004 - .0117"
Diameter and Pitch of Leadscrew (Diameter | TPI): 1.38" | 4
Number of Inch Threads: 44 TPI
Range of Inch Thread: 2 - 72 TPI
Number of Metric Threads: 39
Range of Metric Thread: .2 - 14mm
Maximum Travel of Compound: 5-7/8"
Maximum Travel of Cross Slide: 10.4"
Tailstock Quill Travel: 5-7/8"
Tailstock Quill Diameter: 2-3/8"
Taper in Tailstock Quill: MT-4
Main Motor (HP | KW): 7-1/2 | 5.59

Electrics: 230V/460V/3 Phase/60 Hz., Prewired 230V

Machine Floor Space Dimensions: 98" x 41" x 47"
Machine Weight: 3,520 lbs

Shipping dimensions:
Machine: 90" x 41" x 57" 3,520 lbs
Chip Pan: 49" x 26" x 9" 100 lbs

Loading...
Loading...
Loading...
Loading...