Ganesh Cyclone CS-32T Gang/Turret Turning Center, new 2007
LATHES, CHUCKING, N/C & CNCFull C-axis (can Polygon Turn, Rigid Tapping)
8-pos Turret, 4 OD & 4 ID positions
Turret sits on the same tool plate as the 4-pos Live Gang-Tool Endworking Block (can use live or fixed tools)
Misc Tooling, Tool box,
I/O: USB-A, Ethernet, RS-232; Door interlock safety
Parts Chute with exit track & parts catcher
Chip pan
Signal Tower Light
Work Light, Halogen
Barfeed Interface
Multiple used short loaders up to full 12' cap hyd or magazine type loaders available: ask for quote
Swing | 6.7" |
Machining Length | 6.5" |
# Axis | 3 |
Bar Capacity | 1.25" |
Power | 5 hp |
Max RPM | 4,000 RPM |
Live Tooling | Yes |
# of Turrets | 1 |
Control | CNC (Super 900T (G-code)) |
Dimensions | 77 x 57 x 63" |
Weight | 4000 lbs |
This is a Sliding Headstock Chucker Machine (like a CNC Swiss Chucker)
Barfeed Capacity 1.25” (36mm)
Spindle Speed 4000 RPM (must verify)
Spindle Servo Motor 5-HP Continuous ( optional 7.5-HP Continuous)
Spindle Collet 5C
Spindle Nose A2-4
Swing Dia (over tooling plate) 6.7” 170 mm
Turning Diameter 4.72” 120 mm
Turning Length 6.50” 165 mm
X-Axis Table Cross Travel 9.875” 250 mm
Z-Axis Headstock Longitudinal Travel 6.50” 165 mm
Spindle: F
Full C-axis 0.001° resolution (360,000 radial positions)
Live Tool Collet Size ER-25 collets - 5/8” capacity
Live Tool Spindle Speed 4000rpm
Live Tool Servo Motor 1-HP/ 2 HP (Optional)
Polygon Turning Available option
Rapid Traverse Rate 710 imp 18,000 mm / minute
Master Cross Slide Tool Surface 10” x 24” (approx.) 254mm X 610 mm
Master Cross Slide T-Slots 3 x 10mm T-slots on 100mm centers
Tooling Sub-Plate 18” Dovetail mount (allows tool removal
w/o moving other tools)
Additional Sub-Plate; Hardinge® style for 3/8” & 1/2” tooling
Coolant Pump 3/4 HP
Coolant Tank w/ double filtration 32-gallons (120 liters)
Air Requirements 85-psi @ 1-cfm for parts catcher and spindle brake
Shipping Dimensions:
Machine: 101" x 58" x 66" 4,000 lbs
Pallet w/misc: 50" x 44" x 40" 336 lbs
Full C-axis (can Polygon Turn, Rigid Tapping)
8-pos Turret, 4 OD & 4 ID positions
Turret sits on the same tool plate as the 4-pos Live Gang-Tool Endworking Block (can use live or fixed tools)
Misc Tooling, Tool box,
I/O: USB-A, Ethernet, RS-232; Door interlock safety
Parts Chute with exit track & parts catcher
Chip pan
Signal Tower Light
Work Light, Halogen
Barfeed Interface
Multiple used short loaders up to full 12' cap hyd or magazine type loaders available: ask for quote
Swing | 6.7" |
Machining Length | 6.5" |
# Axis | 3 |
Bar Capacity | 1.25" |
Power | 5 hp |
Max RPM | 4,000 RPM |
Live Tooling | Yes |
# of Turrets | 1 |
Control | CNC (Super 900T (G-code)) |
Dimensions | 77 x 57 x 63" |
Weight | 4000 lbs |
This is a Sliding Headstock Chucker Machine (like a CNC Swiss Chucker)
Barfeed Capacity 1.25” (36mm)
Spindle Speed 4000 RPM (must verify)
Spindle Servo Motor 5-HP Continuous ( optional 7.5-HP Continuous)
Spindle Collet 5C
Spindle Nose A2-4
Swing Dia (over tooling plate) 6.7” 170 mm
Turning Diameter 4.72” 120 mm
Turning Length 6.50” 165 mm
X-Axis Table Cross Travel 9.875” 250 mm
Z-Axis Headstock Longitudinal Travel 6.50” 165 mm
Spindle: F
Full C-axis 0.001° resolution (360,000 radial positions)
Live Tool Collet Size ER-25 collets - 5/8” capacity
Live Tool Spindle Speed 4000rpm
Live Tool Servo Motor 1-HP/ 2 HP (Optional)
Polygon Turning Available option
Rapid Traverse Rate 710 imp 18,000 mm / minute
Master Cross Slide Tool Surface 10” x 24” (approx.) 254mm X 610 mm
Master Cross Slide T-Slots 3 x 10mm T-slots on 100mm centers
Tooling Sub-Plate 18” Dovetail mount (allows tool removal
w/o moving other tools)
Additional Sub-Plate; Hardinge® style for 3/8” & 1/2” tooling
Coolant Pump 3/4 HP
Coolant Tank w/ double filtration 32-gallons (120 liters)
Air Requirements 85-psi @ 1-cfm for parts catcher and spindle brake
Shipping Dimensions:
Machine: 101" x 58" x 66" 4,000 lbs
Pallet w/misc: 50" x 44" x 40" 336 lbs