Crest SA-2/181212 Low Emissions Ultrasonic Cleaning & Vapor Degreaser
Ultrasonic Washers and Cleaning Systems
Fully Enclosed System
Automated basket transport inside the enclosure
Multi-basket process capabilities
*Updated Allen-Bradley PLC Control Systems and Display
Seal Load Lock Chamber
(2) Ultrasonic Wash/Rinse Sumps - 132 kHz Technology
On Board Super Heated Vapor Drying Station to Reduce to Minimum Solvent Drag Out
On Board Water Cooled Direct Expansion Condenser for Primary and Sub-cooling Freeboard
Capable of Running all Popular Safety Solvents (HFE's, HCFC, HFC's, NPB) (Non-Flammable)
Welded Stainless Steel Plumbing Throughout
Low Emission Design
(3) Process Stainless Steel Baskets Included
Full Documentation Included
System loaded with extra features like quick disconnect fill and drain plumbing which are included
at no additional cost to you.
Unit has minimal hours and is in near-perfect condition!
Option available through OEM: Conveyorized cueing load and unload system
Replacement Value: $200,000.00
| Tank-W | 18" |
| Tank-L | 12" |
| Tank-H | 12" |
| Control | CNC (Allen-Bradley) |
| Dimensions | 115" x 55" x 94" |
| Weight | 4000 lbs |
To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.
General Specifications:
Total Solvent Volume: 50 Gallon
System Dimensions: 48" x 78" x 88"
Basket Size: 16" x 10" x 10"
Tank Size: 18" x 12" x 12"
Electrics: 480V / 3Ph / 60 Amp
Dimensions:
Machine: 115" x 55" x 94"
Additional solvent Tank: 28" x 31" x 21" 150 lbs
NOTE: This unit requires a 3 ton aqueous chiller to chill the solvent (not included)
Fully Enclosed System
Automated basket transport inside the enclosure
Multi-basket process capabilities
*Updated Allen-Bradley PLC Control Systems and Display
Seal Load Lock Chamber
(2) Ultrasonic Wash/Rinse Sumps - 132 kHz Technology
On Board Super Heated Vapor Drying Station to Reduce to Minimum Solvent Drag Out
On Board Water Cooled Direct Expansion Condenser for Primary and Sub-cooling Freeboard
Capable of Running all Popular Safety Solvents (HFE's, HCFC, HFC's, NPB) (Non-Flammable)
Welded Stainless Steel Plumbing Throughout
Low Emission Design
(3) Process Stainless Steel Baskets Included
Full Documentation Included
System loaded with extra features like quick disconnect fill and drain plumbing which are included
at no additional cost to you.
Unit has minimal hours and is in near-perfect condition!
Option available through OEM: Conveyorized cueing load and unload system
Replacement Value: $200,000.00
| Tank-W | 18" |
| Tank-L | 12" |
| Tank-H | 12" |
| Control | CNC (Allen-Bradley) |
| Dimensions | 115" x 55" x 94" |
| Weight | 4000 lbs |
To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.
General Specifications:
Total Solvent Volume: 50 Gallon
System Dimensions: 48" x 78" x 88"
Basket Size: 16" x 10" x 10"
Tank Size: 18" x 12" x 12"
Electrics: 480V / 3Ph / 60 Amp
Dimensions:
Machine: 115" x 55" x 94"
Additional solvent Tank: 28" x 31" x 21" 150 lbs
NOTE: This unit requires a 3 ton aqueous chiller to chill the solvent (not included)
