New FMB Turbo 20-100 Magazine Bar Feed

Specifications from OEM brochure and equipped with are described to the best
of our knowledge. ALL items should be verified by buyer.

General Specifications:
Bar Diameter Capacity-No Bar Prep: 20 MM to 90 MM (.787" to 3.540")
Bar Diameter Capacity-With Bar Prep: 20 MM to 100 MM (.787" to 3.940")
Maximum Bar Length: 4200 MM (13 Feet 8 Inches)
Minimum Bar Length: 1000 MM (39.400")
Maximum Remnant Length: 580 MM (22.800")
Magazine Rack Capacity: 11"
Magazine Rack Angle: Adjustable 6-20
Bar Loading Cycle Time: 45 Seconds For 12-Foot Bar
Material Straightness Specification: .007" TIR/Foot of Material
(V Blocks, 3 Points Equidistant)
Feed Force (Pusher Torque): Max 750 N, Adjustable
Forward Feed Rate: 2360 Inches/Minute Max, Adjustable
In-Feed Rate: 0-1650 Inches/Minute Max, Adjustable
Power Consumption: 5.5 kW - (6 kVA)
Operating Voltage: 230V/60Hz 3-Phase
Control Voltage: 24V DC
Oil Capacity: 80 Liters (22 Gallons)
Oil Viscosity: ISO 150 cST
Compressed Air Supply: 6 Bar (90 psi)
Compressed Air Consumption: Approx. 10 Liters Per Loading Cycle
Machine Weight (Without Oil): 8,200 LBS

FMB Turbo 20-100 12’ (2) Guide Channel Set Complete Package $106,000.00
Includes: (2) channel sets, (2) pushers, (2) pusher collets, & (1) spindle liner

FMB Turbo 20-100 12’ (with auto adjust system) $114,900.00

Installation USA: $3,850.00

Additional guide channel set $7,850.00
(includes pusher, revolving tip, nose liner & spindle liner)
Spindle liner $ 850.00
(needed when selecting a guide channel set whose max. bar diameter
is smaller than the draw tube of the lathe)
Bar stock pusher collets (specific collet required for each bar diameter):
Barstock collet for channel set from 25 mm to 42 mm $ 230.00
Barstock collet for channel set from 60 mm to 70 mm $ 495.00
Barstock collet for channel set from 80 mm to 100 mm $ 720.00
Polyurethane bushing blocks $ 220.00
(one set includes upper and lower pieces and is used in place of rollers in standard
steady rest when machining hex, square, or profiled stock)
Air knife $1,900.00
(recommended to minimize bar feeder oil loss when running shafts)
Tall stands for lathes with spindle center greater than 1280 mm $2,600.00
Serial interface Ethernet connection $2,700.00
Dual channel safety kit $ 500.00
Long pusher kit $7,500.00
Axial shift device $7,500.00
Bundle loader option for 5,000 lbs of material Contact Edge