New
GEKA Hydracrop 55 SD Hydraulic Ironworker
PUNCH-SHEARS, IRONWORKERS| $25,972.10 USD |
GEKA Hydracrop 55 SD Dual Cylinder Hydraulic Ironworker
Productivity Kit:
40" “Touch & Cut” Electric Length Stop
Set of 10 Round Punches and Dies of your choosing from 1/8” to 1-1/4” Round with 1/32” clearance.
Work Light with Magnetic Base
The following hand tools are included with the machine.
• Open End Wrench 17-19mm 20-22mm 24-27mm
• Spanner Wrench for removal of punch nut
• Hex Keys 3, 4, 5, 6, 8, 10, 12, 14mm
• Manual Grease Gun
• Punch holders for GEKA No 8/32C & 8/40
• Die Reducer for GEKA No 5 Tools
• Die Riser for GEKA No 8.
• Printed Manual with Parts List
| Tonnage | 60 T |
| Angle (L1) | 4" |
| Angle (L2) | 4" |
| Angle (T) | 12" |
| Power | 6.5 hp |
| Throat | 19.68" |
| Dimensions | 67" x 45" x 82" |
| Weight | 3,065 lbs |
“To the best of our knowledge all details listed below are deemed correct.
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.”
General Specifications:
Flatbar (with Slight Deformation): 12" x 5/8"
8" x 3/4"
Length of Blade: 12"
Square Bar Diameter: 1"
Working Height: 34-5/8"
Cut of an L Leg at 45 Degrees: 2-3/8"
Shears for Section Iron
Shearing Power: 110 Tons
L at 90 Degrees without Deformation: 4" x 4" x 1/2"
L at 45 Degrees (2 Legs): 3" x 3" x 5/16"
With Special Blade
L at 90 Degrees (with Slight Deformation): 5" x 5" x 1/2"
Shears for Bars
Round Bar: 1-9/16"
Square Bar: 1-9/16"
With Special Blades
UPN: 4"
IPN: 4"
Notching
Plate Thickness: 3/8"
Angle of: 4"
Depth: 3-1/2"
Width: 1-5/8"
Punching
Punching Power: 60 Tons
Maximum Capacity: 1-1/2" x 3/8"
3/4" x 3/4"
Throat: 10"
Stroke: 2-3/8"
Working Height: 42"
General Specifications:
Strokes Per Minute: 37
Motor Power: 7.5 HP
Machine Weight: 3,065 lbs
Machine Dimensions: 67" x 45" x 82"