Buy Machinery Sell Your Machine Used Machines Auctions & Appraisals Appraisals New Machines Machine Videos Financing Blog & News Contact Who We Are
FACEBOOKLINKEDINYOUTUBEEBAY
(303) 651 - 6545
Used Machines
Expand Machinery GenMill 10039
Model:
GenMill 10039
Year:
2021
Stock #:
601499
Manufacturer:
Expand Machinery
New 2021 Expand Machinery GenMill 10039 Vertical Machining Center
X:
98"
Y:
39"
Z:
35"
# Axis:
3
Power:
50 hp
RPM:
12,000 RPM
Taper:
CAT 40
# ATC:
40
Table-W:
98"
Table-L:
39"
Mitsubishi M830 CNC Control - NANO processing with 2700-Block Look-Ahead for High-Speed 3-D Contouring
12,000 RPM Direct-Drive Beltless Spindle
Belt Type Chip Conveyor with 38” barrel height discharge
Big-Plus dual-contact High-Performance precision spindle
40 -Tool Twin-Arm Chain-Driven Tool-Changer
300 PSI “Through-the-Spindle” Coolant with rotary union
Chip Wash- Down System
Twin Chip Augers to push chips forward
Full Machine Enclosure w/Top Covers & precut exhaust duct
Spindle Air Blast by M-Code
Spindle Oil Cooler – Thermostatically controlled
Coolant oil-separator to control coolant contaminants
32-GB Solid-State Data Server integral to CNC control
Remote Operator MPG Hand wheel with magnetic base
High-Speed Synchronous Rigid Tapping
4th and 5th Axis Prewired with quick-disconnect connectors
Dual High-Intensity LED Worklamps
Machine Condition Display Signal Lamp
6 - Thru-Tool-Coolant Pull-Studs
To the best of our knowledge all details listed below are deemed correct. 
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.      

General Specifications:

AXIS TRAVEL
X-Travel: 98.425” (2,500mm)
Y-Travel: 39.37” (1000mm)
Z-Travel: 35.43” (39.37” opt.) (900mm (1000mm opt.)
Spindle Nose to Table Surface: 9.8”– 45.27” (250 – 1150mm)
Spindle Center to Z-Axis Covers: 41.53” (1055mm (throat dimension)

TABLE
Table Size (LxW): 98.42” x 39.37” (2,500mm X 1000mm)
T-slots - 5 total 22mm slot width on 1260mm centers
Table Load 7,700 lbs (3500 kgs load)

SPINDLE
Spindle Motor (S1/S2): 50-Horsepower Peak 35-HP 30-Minute Duty-Rating (22/26 kW)
Spindle Speed: 12,000 RPM (15,000 – 20,000 RPM Optional) Direct Drive
Tool Type: CAT #40 Taper (CAT/BT #40 & # 50 taper optional)
Retention Knob (Pull Stud): C40-4502H Coolant Japanese Standard
Spindle Taper Material/Hardness: SCM415 / HRC58-62
Retention System/Holding Capability: Bellville Spring Stack 1650-1760 lbs
Spindle Runout: 0.000040 T.I.R.
Spindle Bearing Front: 110mm NSK 70BNR 10 x 2, P4 Class-7 Bearings
Spindle Bearing Rear: 110mm NSK 70BNR 10 x 2, P4 Class-7 Bearings

AXIS FEEDS
Accuracy (X/Y/Z)(JIS6338): ± 0.0002” / 12” (± 0.005mm Over 300mm Travel)
Repeatability (X/Y/Z)(JIS6338): ± 0.0001” / 12” (± 0.003mm Over 300mm Travel)
Least Input Command Increment: 0.0001” / 0.000040” (0.001mm / (40-millionths in metric)
Rapid Traverse (X/Y): 472 IPM (12m / minute)
Rapid Traverse (Z): 393 IPM (10m / minute)
Cutting Feedrate: 0.02-393 IPM (10m / minute)
Axis Drive Motor Power (X/Y): 10-Hp (7kw)
Axis Drive Motor Power (Z): 10-Hp (7kw w/brake)
Ballscrews (X/Y/Z): 63mm ballscrews 10mm pitch

TOOL CHANGER (Specifications Change with 50-Taper Option)
Tool Capacity (40+1): 40-Tool Twin-Arm Chain-Drive
Tool Shank: CAT #40 Taper (BT#40 & 50 optional)
Tool Change Time: 4.3-Second Tool-to-Tool
Tool Diameter / w/adjacent tool 5.90” / 3.15” 150mm / 80mm
Tool Length: 11.81” (300mm)
Tool Weight: 15 lbs. (7kg)
Tool Selection/Tool Access: Random access / Bi-directional

SPECIFICATIONS
Air Service Requirements: 85 psi @ 14-cfm
Coolant Capacity: 172 gallons (650 liters)
Connected Load Electrical Requirement: 100-amps 220vac ±5%, 60-Hz (36kva)
Floor Space Requirements Recommended: 237” x 146” x 142” (600 x 370 x 360cm) (add 52” for conveyor)
Shipping dimensions (L x W x H): 248” x 154” x 150” (630 x 390 x 380cm)
Machine Weight 66,138 pounds (30,000 kg)

Machines need stable 220 Volts, 3 Phase – Please use Appropriate Transformers or Voltage Stabilizers

Machine Options
Factory Machine Installation: “Peace-of-Mind Factory Installation” –Includes Expenses:..$5,995.00
Factory On-Site 3-day Machine Operation and Program Training – Includes Expenses:.......$4,995.00
Substitute #40-Taper 8,000 RPM 2-Speed ZF Geared-Head Spindle:..........................$10,495.00
Substitute #50-Taper 6,000 or 8,000 RPM Geared-Head Spindle:............................$16,495.00
Substitute #50-Taper Direct-Drive 10,000 RPM Spindle:...................................$15,495.00
Heidenhain Linear Scales for all 3-Axis:................................................$23,695.00
Renishaw OMP60/OTS/CAT40 Hardware and Software Kit Installed:...........................$8,990.00
Fanuc 0iMF Control & Drive Package is Available with a 2-year Warranty:.................$6,995.00