Buy Machinery Sell Your Machine Used Machines Auctions & Appraisals Appraisals New Machines Machine Videos Financing Blog & News Contact Who We Are
FACEBOOKLINKEDINYOUTUBEEBAY
(303) 651 - 6545
Used Machines
Expand Machinery GenMill 6333
Model:
GenMill 6333
Year:
2021
Stock #:
601380
Manufacturer:
Expand Machinery
New 2021 Expand Machinery GenMill 6333 Vertical Machining Center
X:
63"
Y:
33.4"
Z:
33.4"
# Axis:
3
Power:
40 hp
RPM:
12 RPM
Taper:
CT 40 Big Plus
# ATC:
40
Table-W:
27.56"
Table-L:
68.9"
Mitsubishi M830 CNC Control
12,000 RPM Direct-Drive Beltless Spindle
Belt Type Chip Conveyor with 38” barrel height discharge
Big-Plus dual-contact High-Performance precision spindle
40-Tool High-Speed Twin-Arm Chain-Drive Tool-Changer
300 PSI “Through-the-Spindle” Coolant with rotary union
Chip Wash- Down System
32-GB Solid-State Data Server integral to CNC control
Twin Chip Augers to push chips forward
Full Machine Enclosure w/Top Covers & precut exhaust duct
Spindle Air Blast by M-Code
Spindle Oil Cooler – Thermostatically controlled
Remote Operator MPG Hand wheel with magnetic base mount
High-Speed Synchronous Rigid Tapping
4th and 5th Axis Prewired with quick-disconnect connectors
Dual High-Intensity LED Worklamps
6 - Thru-Tool-Coolant Pull Studs
To the best of our knowledge all details listed below are deemed correct.
It is the buyers responsibility to confirm ALL details prior to purchase.

General Specifications:

Axis Travel
   X-Axis (6 Cross Roller Trucks):        63"            (1,600mm)
   Y-Axis (4 Cross Roller w/ 8 Trucks:    33.4"          (850mm)
   Z-Axis:                                33.4"          (850mm)
   Spindle to Rotary Table Surface:       5.9-39.37"     (150-1000mm)
   Spindle Center to Z Way Covers:        33.4"          (850mm (Throat)

Table
   Table Size:                            68.8" x 27.56" (1,750mm x 700mm)
   T-Slot Width (3 T-Slots Total):        18mm           (100mm Centers)
   Table Load:                            5500 lbs       (2500 kgs load)

Spindle
   Spindle Motor:                         40 HP S3 Power 35HP 30-Min
   Spindle Speed:                         12,000 RPM
   Spindle Torque:                        90 ft-lb @ 1,500 RPM
   Tool Type:                             CAT #40 Taper
   Retention System/Holding Capability    Bellville Spring Stack (1650-1760 lbs)
   Spindle Runout:                        <0.000040" TIR
   Spindle Bearings - Rear:               110mm NSK70BNR 2-P4 Class 7 Bearing
   Spindle Bearings - Front:              110mm NSK70BNR 2-P4 Class 7 Bearing
   Retention Knob:                        C40-4502H (Coolant)

Axis Feeds
   Rapid Traverse (X,Y):                  984 IPM        (25m/minute)
   Rapid Traverse (Z):                    984 IPM        (25m/minute)
   Cutting Feedrate:                      0.4-393 IPM
   Ballscrews (X,Y,Z):                    50mm Ballscrews (10mm Pitch)
   Least Input Command Increment:         0.0001"/0.000040" (0.001mm(40 Millionth)
   Accuracy X,Y,Z Axis (JIS6338):         +0.0002"/12"   (+0.005mm Over 300mm)
   Repeatability X,Y,Z Axis (JIS6338):    +0.0001"/12"   (+0.003mm Over 300mm)

Tool Changer
   Tool Capacity (40+1):                  40 Tool Twin Arm
   Tool Shank:                            CAT#40 Taper
   Tool Change Time:                      3.7 Seconds Tool to Tool
   Tool Diameter / w/adjacent tool:       5.90" / 3.15"  (150mm/80mm)
   Tool Length/Weight (from gage line):   11.81" / 15 lbs (300mm/7Kg)
   Tool Selection/Tool Access             Random/Bi Directional 

General
   Coolant Capacity:                      148-Gallons    (560 Liters)
   Electrical - Connected Load:           220vac+5%, 60hz (75 Amps)
   Air Service Requirements:              85 PSI @ 14-scfm
   Machine Dimensions:                    185" x 130" x 120" (470 x 330 x 260cm)
   Machine Weight:                        26,455 lbs     (12,000 kg)

Machine Options
Factory Machine Installation: “Peace-of-Mind Factory Installation” – Includes Expenses:..$2,995.00
Factory On-Site 3-day Machine Operation and Program Training – Includes Expenses:........$3,995.00
Belt Type Chip Conveyor with 38” Barrel Height Discharge:................................$4,990.00
Substitute #40-Taper 8,000 RPM 2-Speed ZF Geared-Head Spindle:...........................$4,995.00
Substitute #50-Taper 6,000 or 8,000 RPM Geared-Head Spindle:.............................$14,995.00
Substitute #50-Taper Direct-Drive 10,000 or 12,000 RPM Spindle:..........................$9,995.00
1,000 PSI High-Pressure Thru-the-Spindle Coolant System – Installed:.....................$9,995.00
Upgrade to 15,000 RPM CAT-40 Taper Spindle:..............................................$6,995.00
Voltage Stabilizers and Transformers (Specify Voltage Needs):............................P.O.R.
Second-Year Machine and Control Warranty:................................................$7,450.00
Heidenhain Linear Scales for all 3-Axis - Installed:.....................................$17,495.00
Fanuc 0iMF Control and Drive Package is Available with 2-Year Warranty:..................$6,995.00