Buy Machinery Sell Your Machine Used Machines Auctions & Appraisals Appraisals New Machines Machine Videos Financing Blog & News Contact Who We Are
FACEBOOKLINKEDINYOUTUBEEBAY
(303) 651 - 6545
Used Machines
Expand Machinery GenMill 2416
Model:
GenMill 2416
Year:
2021
Stock #:
601378
Manufacturer:
Expand Machinery
New 2021 GenMill 2416 Vertical Machining Center
X:
24.01"
Y:
15.75"
Z:
17.72"
# Axis:
3
Power:
15 hp
RPM:
12,000 RPM
Taper:
CT-40 Big Plus
# ATC:
24
Table-W:
15.75"
Table-L:
25.59"
12,000 RPM Direct-Drive Beltless Spindle
Belt Type Chip Conveyor with 38” barrel height discharge
Big-Plus dual-contact High-Performance precision spindle
24-Tool High-Speed Twin-Arm Tool-Changer
32-GB Solid-State Data Server integral to CNC control
300 PSI “Through-the-Spindle” Coolant with rotary union
Chip Wash- Down System
Full Machine Enclosure w/Top Covers & precut exhaust duct
Spindle Air Blast by M-Code
Spindle Oil Cooler – Thermostatically controlled (machine mounted)
Remote Operator MPG Hand wheel with magnetic base mount
High-Speed Synchronous Rigid Tapping
4th and 5th Axis Prewired with quick-disconnect connectors
Dual LED High-Intensity Worklamps
6 -Thru-Tool-Coolant Pull Studs
To the best of our knowledge all details listed below are deemed correct. 
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.          

General Specifications (Inches/Millimeters):
AXIS TRAVEL
X-Axis Travel: 24.01” / 610mm
Y-Axis Travel: 15.75” / 400mm
Z-Axis Travel: 17.72” / 450mm
Spindle Nose to Table Surface: 5.11”– 22.83” / 130 – 580mm
Spindle Center to Z-axis Way Covers: 15.35” / 390mm (Throat Dimension)

TABLE Hardened & Ground Table & T-slots
Table Size: (LxW) 25.59” x 15.75” / 650mm X 400mm
T-slot Width: (3 T-slots total) (18 mm on 100mm) Centers
Table Load: 882 lbs. / 400 kgs load

SPINDLE
Spindle Motor – S1/S2/S3: 15-HP S3 power (10-HP 30-min. duty rated) / 5.5/7.5/11kW
Spindle Speed: Inline Direct-Drive 12,000 RPM (15,000 RPM optional)
Tool Type: CAT #40 Taper (BT #40 optional)
Spindle Taper Material: / Hardness SCM415 / HRC 58-62
Spindle Runout: ≤ 0.000040” T.I.R.
Spindle Bearings - Front: 95mm NSK 70BNR P4 Class-7 Bearings x 2
Spindle Bearings - Rear: 95mm NSK 70BNR P4 Class-7 Bearings x 2
Retention System / Holding Capability: Bellville Spring Stack 1650-1760 lbs
Retention Knob (Pull Stud): C40-4502H (Coolant) Japanese Standard

AXIS FEEDS
Accuracy (X/Y/Z): (JIS6338) ± 0.0002” / 12” / ±0.005mm over 300mm Travel
Repeatability (X/Y/Z) Axis: (JIS6338) ± 0.0001” / 12” / ±0.003mm over 300mm Travel
Least Input Command Increment 0.0001” / 0.000040” / 0.001mm / (40-millionths in metric)
Rapid Traverse (X/Y): 1,417 / 36m Minute
Rapid Traverse (Z): 1,260 IPM / 32m Minute
Cutting Feedrate: 0.02 - 393 IPM / 10m Minute
Axis Drive Motor Power (X/Y): 2.7-HP / 2.0kw
Axis Drive Motor Power (Z): 3.35-HP / 2.5kw
Ballscrews (X/Y/Z): 32mm Ballscrews / 12mm Pitch
Linear Ways – X/Y/Z: 30 / 35 / 35 mm / Premium Cross-Roller

TOOL CHANGER
Tool Capacity: (24+1) 24-Tool Twin-Arm Hi-Speed Tool Changer
Tool Shank: CAT#40 Taper (BT#40 Optional)
Tool Change Time: 1.7-sec. Tool-to-Tool
Tool Diameter / with Adjacent Tool: 5.90” / 3.15” / 150mm / 80mm
Tool Length (from gage line): 11.81” / 300mm
Tool Weight: 15 lbs. / 7kg
Tool Selection / Tool Access: Random access Bi-directional / Shortest Path

SPECIFICATIONS
Air Service Requirements: 85 psi @ 14-scfm
Electrical Requirements - Connected Load: 220vac ±5%, 60-Hz 50-Amp Service
Coolant Capacity / Pressure: 68-gallons / 300 psi / 256 liters / 20-bar
Floor Space Requirements (W x D x H): 87” x 73” x 113” / 218 x 186 x 288cm (add 44” for conveyor)
Shipping Dimensions (W x D x H): 97” x 91” x 101” / 246 x 229 x 256cm
Machine Weight: 9,923 Pounds / 4,500 kg

*3-year Mitsubishi control, motors, and drive warranty and 1-year machine warranty is provided.
*Machines need stable 220 Volts, 3 Phase – Please use appropriate transformers or voltage stabilizers

Available Machine Options:
Factory machine installation: “Peace-of-Mind Factory Installation”, includes expenses:..$2,995.00
Factory on-site 3-day machine operation and program training, includes expenses:........$4,995.00
15,000 RPM spindle speed upgrade – 40-Taper:............................................$6,295.00
20,000 RPM spindle speed upgrade – HSK-63, 30-HP 30-min rated, 87 ft. lbs. torque:......P.O.R.
Heidenhain linear scales for all 3-axis, installed:.....................................$13,195.00
Renishaw OMP60/OTS/CAT40 Hardware and Software Kit, installed:..........................$8,990.00