Tsugami BU-26SY CNC Swiss Gang Slide/Turret Lathe, New approx 2003
CNC Swiss Lathe
Tsugami BU-26SY Gang-Turret CNC Swiss Lathe
New approx 2003
LNS THB-32 Single Tube Bar Feed
Mist Buster Oil/Mist Collection System
MP Systems HPC (500 psi?) Single LIne High Pressure Coolant System
Part Conveyor
| Capacity | 1" |
| Power | 7.3 hp |
| RPM | 5,000 RPM |
| # Axis | 8 |
| Swiss, Chucker or Convertible? | Swiss |
| Main Spindle Indexing | Full C |
| Sub Spindle Indexing | Full C |
| B-Axis? | No |
| Control | CNC (FANUC 18ITB) |
General Specifications As Per OEM Brochure
Main Spindle
Bar Capacity: 1.000"
Turning Lengths: 9.842 " per Stroke
Indexing Increments: Full C-Axis (.001 deg)
Speeds: 6000 RPM
Sub-Spindle
Bar Capacity: 1.000 "
Speed: 200 - 5000
Drive Motor: 7.3 hp
Index Increment (Degrees): Full C-Axis (.001 Deg)
Axis Specifications
STD. Number of Axes: 8
Axis/ Travel/ Traverse rate/ Feed rate
X1 (STD.) 1.378 Inch 472 IPM 236 IPM
Z1 (STD.) 9.842 Inch 944 IPM 236 IPM
C1 (STD.) 360.000 Deg.
Y1 (STD.) 9.448 472 IPM 236 IPM
X2 (STD.) 4.330 Inch 472 IPM 236 IPM
Z2 (STD.) 5.511 Inch 944 IPM 236 IPM
Y2 (STD.) 3.149 Inch 393 IPM 236 IPM
Z3 (OPT.) 11.220 Inch 944 IPM 236 IPM
Live Tool Speed: 5000 RPM
Live Tool Motor: (HP): 15.0
Type/ Gang-Slide/ Turret
-Max. number of tools
Turning 7 8
Rotary 2 4
Square 0.500 "
Round 0.750 " 1.000 "
Rotary 0.250 " 0.500 "
Rotary tooling
Horse power .7 1.9
Speed 8000 rpm 5400 rpm
There are a number of tools offered that allow for 2 - 4 tools on one holder
On-Center Mill Drill Standard with 'C' Axis
Off-Center Mill Drill Standard with 'Y' Axis
Floor layout: Length: 137 " x Width: 80 " x Height: 69 "
The Tsugami BU26Y (1" capacity) is a benchmark that sets the rules for
power, rigidity, and longevity; it is the future of the Swiss-type machine
technology.
* Now, taking advantage of new control technology with Fanuc 18iT control,
increased power and drives it's more efficient than ever.
* A wide assortment of driven tools for the rear turret driven tool stations
is available, also included are driven cross tools on the front slide, making
this the most flexible of models.
* An 8-station turret (3-axis), plus an independent gang tool slide with
driven tools permits many simultaneous functions. Balanced turning, balanced
threading, simultaneous front and back working.
* Standard are a 15hp main spindle, 7.5hp sub-spindle with through feed
capability, 8-axis including x1,x2,z1,z2,z3, and y. Excellent for complex
machining.
Machine: 133" x 83" x 101" 12,100 lbs
Coolant/Chip Pan: 80" x 62" x 23" 250 lbs
