Buy Machinery Sell Your Machine Used Machines Auctions & Appraisals Appraisals New Machines Machine Videos Financing Blog & News Contact Who We Are
FACEBOOKLINKEDINYOUTUBEEBAY
(303) 651 - 6545
Used Machines
GANESH T-700
Model:
T-700
Year:
2017
Stock #:
600243
Manufacturer:
GANESH
2017 Ganesh Genmill T-700 Drilling & Tapping Machine
X:
27"
Y:
16 "
Z:
12 "
Power:
7.5 hp
RPM:
12,000 RPM
# ATC:
21
Taper:
BT 30
Mitsubishi M80 CNC Control
21 Station High Speed ATC
Chip Conveyor w/ Cart
To the best of our knowledge all details listed below are deemed correct. 
It is the buyer’s responsibility to confirm all details and we encourage an inspection of the machine(s) and accessories prior to purchase.          

General Specifications:
Axis Travel
 X-Axis:                            27.56"              700mm
 Y-Axis:                            16.93"              430mm
 Z-Axis:                            12.99"              330mm
 Spindle Nose To Table Surface:     5.1"-18.1"          130-460mm
 Spindle Centerline To Column:      18.89"              480mm

Work Table
 Table Surface Dimension (X/Y):     33.04" x 15.75"     850 x 400mm
 T-Slot Dimension/Spacing:          3-14mm Slots        125mm Spacing
 Table Height:                      35" Above Floor     890mm
 Table Weight for Accuracy:         550 lbs             250 KG

Spindle
 Spindle Motor:                     Mitsubishi DJ-D5.5/120-01 - 7.5 HP
 Spindle Motor Coupling:            Inline Direct Drive
 Spindle Speed:                     12,000 RPM          15,000 RPM Optional
 Synchronous Tapping Speed Limit:   6,000 RPM
 Tapping Performance:               M20 x 2.5 Aluminum  M14x2.0 Steel 
 Drilling Performance:              38mm Aluminum       25mm Steel
 Spindle Torque:                    26 ft-lb @ 1500 RPM
 Tool Type:                         BT#30               4 Bearing Spindle
                                                        2 Top - 2 Bottom
 Spindle Bearing - Inner Diameter:  40mm                P4 Class
                                                        7 Steel Ball Bearings
 Spindle Material / Hardness:       SCM415              HRC 58-62
 Retention System / Holding:        MAS-P30T-1          Bellville Spring Stack
                                                        1650-1760 lbs
 Spindle Runout:                    <0.000040" TIR / Pull Stud USST B30-4500H

Axis Feeds (X/Y/Z)
 Rapid Traverse:                    2,362 IPM           60/60/60m/minute
 Rated Cutting Feedrate:            0.04 - 1181 IPM     30/30/30m/minute
 Mechanical Way System:             Roller Ways         Cross Roller 30/30/35
 Axis Drive Motor Power:            2 HP /3 HP          1.5 kw/2.2 kw w/ Brake
 Axis Thrust Force:                 3,335lbs/3,692lbs   14840 N/16430 N
 Ballscrews:                        32mm                16mm Pitch
 Positioning Accuracy:              +0.00015"           +0.004mm
 Positioning Reapeatability:        +0.00008"           +0.002mm
 Least Input Command Increment:     0.0001" / 0.000040" 0.001mm 40 Millionths

Tool Changer
 Tool Capacity:                     21-Tools            Drum turret
 Tool Shank:                        BT#30               MAS P30T-1 Pull Stud
 Tool Change Time:                  1.6 Sec             Servo Motor Driven
 Tool Diameter with Adjacent Tool:  2.36"/3.15"         60mm/80mm w/No Tool
 Tool Length / Max. Tool Weight:    7.87"/6.6 lbs       200mm/ 3 kg
 Tool Selection / Tool Access:      Random              Bi-Directional

General
 Air Service Requirements:          85 psi @ 5 scfm     6 kg/cm2
 Electrical Requirements:           16kva, 40 Apms      22vac+5%, 60hz 
 Coolant Pump - Chip Flush Pump:    1.0 HP              .75kw
 Cutting Tools - HP / Pressure:     1.0 HP / 45 PSI     .75kw
 Coolant Tank Capacity:             40 Gallons          150 Liters
 Machine Dimesnions:                73"x87"x95"         185x221x241 cm
 Machine Weight:                    6,770 lbs           3,070 kg