Buy Machinery Sell Your Machine Used Machines Auctions & Appraisals Appraisals New Machines Machine Videos Financing Blog & News Contact Who We Are
FACEBOOKLINKEDINYOUTUBEEBAY
(303) 651 - 6545
Used Machines
MORI SEIKI NT 1000 SZ
Model:
NT 1000 SZ
Year:
2010
Stock #:
600142
Manufacturer:
MORI SEIKI
2010 Mori Seiki NT-1000SZ Multi-Axis CNC Turning Center with Chip Conveyor & High Pressure Coolant Unit
8” CHUCK ON MAIN SPINDLE
FANUC CONTROL
CHIP CONVEYOR
HIGH PRESSURE COOLANT UNIT
ALL AVAILABLE MANUALS
SPECIFICATIONS:
.MAX WORKPIECE DIAMETER 14.57"
.SWING OVER CROSS SLIDE 14.57"
.MAXIMUM DISTANCE BETWEEN SPINDLE NOSES 35"
.BW-AXIS MAX. SWING 35.04"
.MAXIMUM TURNING DIAMETER TOOL SPINDLE 14.57"/TURRET 10.63"
.MAXIMUM TURNING LENGTH 16.69"
.BAR WORK CAPACITY 2.05" 

TRAVEL:
.X1-AXIS TOOL SPINDLE 14.96"
.Y AXIS TOOL SPINDLE 4.13"
.Z1 AXIS TOOL SPINDLE 18.11" + 6.1" ATC TRAVEL
.B AXIS TOOL SPINDLE +/- 120 DEGREES
.X2 AXIS TURRET 2 6.10"
.Z2 AXIS TURRET 2 24.01"
.BW AXIS 0 DEGREES PROCESS/-25 DEGREES PROCESS/-90 DEGREES RETRACT/
         -180 DEGREES LS LOADER/-225 DEGREES WORKPIECE CONVEYOR

SPINDLE 1:
.SPINDLE SPEED 6,000 RPM
.NUMBER OF SPINDLE SPEED RANGES 2 STEP WOUND ROTOR
.SPINDLE NOSE JIS A2-5
.THROUGH SPINDLE HOLE DIAMETER 2.4"
.MINIMUM SPIDNLE INDEXING ANGLE 0.0001 DEGREES
.SPINDLE BEARING INSIDE DIAMTER 3.94"
.SPINDLE TORQUE 40%ED/30MIN/CONT N.M 223/172/158

SPINDLE 2:
.SPINDLE SPEED 5,270 RPM
.NUMBER OF SPINDLE SPEED RANGES 1
.SPINDLE NOSE TYPE 80g6 FLAT NOSE
.THROUGH SPINDLE HOLE 1.5"
.MINIMUM SPINDLE INDEXING ANGLE 0.0001 DEGREES
.SPINDLE BEARING INSIDE DIAMETER 2.76"
.SPINDLE TORQUE (15%ED/CONT) N.m 49/22

TOOL SPINDLE TURRET 1:
.NUMBER OF TOOLS ON SPINDLE HEAD 1
.MINIMUM B AXIS INDEXING ANGLE 0.0001 DEGREES
.TOOL SPINDLE SPEED 12,000 RPM
.TAPER HOLE OF TOOL SPINDLE C5/HSK-A50
.INSIDE DIAMETER OF TOOL SPINDLE BEARING 2.56"
.TOOL MAGAZINE 38 TOOLS
.MAXIMUM TOOL DIAMETER WITHOUT ADJACENT TOOL 5.12"
.MAXIMUM TOOL LENGTH 9.84" WHEN TOOL DIAMETER LESS THAN 2.756"
                    -8.27" WHEN TOOL DIAMETER GREATER THAN 2.756"
.MAXIMUM TOOL MASS 11 LBS
.MAXIMUM TOOL MOVEMENT FROM GAGE TO LINE 3.9"
.SPINDLE TORQUE (15%ED/25%ED/CONT.) 49/37/22 N.m
.TOOL-SPINDLE COUPLING INDEX ANGLE 7.5 DEGREES

TURRET 2:
.NUMBER OF TOOLS ON TURRET 10
.SQUARE SHANK HEIGHT OF SINGLE POINT TOOL .79"
.SHANK DIAMETER BORING BAR 1.26"

FEEDRATES:
.RAPID TRAVERSE RATE IN M/MIN
X: 40
Y: 40
Z: 50
TURRET: 2 X 2 30
Z2: 30
SPINDLE 2 A 36
MIN-1 B 100 C 250
MOTORS:
.SPINDLE 1 DRIVE MOTOR (40%ED/30MIN/CONT.) HP 15/15/10
.SPINDLE 2 DRIVE MOTOR (25%ED/CONT.) HP 10/7.5
.TOOL-SPINDLE DRIVE MOTOR 25%ED/CONT.) HP 12/7.4
.COOLANT PUMP MOTOR HP 1.62
.COOLANT PUMP MOTOR THRU SPINDLE HIGH PRESSURE COOLANT HP 1.39
.COOLANT PUMP MOTOR SPINDLE 1 HP 1.39
.COOLANT PUMP MOTOR TURRET 2 HP 1.39
.COOLANT PUMP MOTOR COOLING UNIT HP .7

TANK CAPACITIES:
.COOLANT TANK 79.2 GALLONS
.LUBRICANT TANK CAPACITY (OIL AIR/SHAFT LUBRICANT) .528/1.11 GALLONS
.SPINDLE OIL COOLER TANK CAPACITY 5.28 GALLONS
.HYDRAULIC UNIT TANK CAPACITY 5.28 GALLONS
.COOLANT COOLING TANK CAPACITY 50.69 GALLONS
.HIGH PRESSURE COOLANT TANK CAPACITY 35.11 GALLONS

MACHINE SIZE:
.94.48" TALL
.REQUIRED FLOOR SPACE 95.47" X 106.5"
.MACHINE WIEGHT WITHOUT UNLOADER 18,700 LBS