Buy Machinery Sell Your Machine Used Machines Auctions & Appraisals Appraisals New Machines Machine Videos Financing Blog & News Contact Who We Are
FACEBOOKLINKEDINYOUTUBEEBAY
(303) 651 - 6545
Used Machines
GANESH T-700
Model:
T-700
Year:
2020
Stock #:
403954
Manufacturer:
GANESH
New 2020 Ganesh Genmill T-700 Drilling & Tapping Machine
X:
27.56"
Y:
16.93"
Z:
12.99"
Power:
7.5 hp
RPM:
12,000 RPM
# ATC:
21
Taper:
BT 30
Heavy Duty Cross Roller Bearing Ways
Dual Ground, Dual Contact "Big Plus" 12,000 RPM Spindle
21-Tool, High Speed Tool Changer
2,362 IPM Rapid Traverse Rates
32-GB High Speed Data Server for Massive Prgram Memory
High Speed Synchronous Rigid Tapping
Coolant System for Cutting Tools
Chip Wash Down Coolant Flushing System
Air Gun & Coolant Gun
Full Machine Enclosure Including Top Cover
Spindle Air Blast by M-Code for Through Spindle & at the Cutting Tool
Portable MPG Hand Wheel with Magnetic Base
LED Worklight
Heat Exchanger for Electrical Cabinet
Machine Condition Signal Lamp - Tri-Color Stack Lamp
Automatic Pressurized Centalized Lubrication System
4th Axis Wiring Pre-Installed
M30 Automatic Power-Off Turn Off the Circut Breaker
To the best of our knowledge all details listed below are deemed correct.
It is the buyers responsibility to confirm ALL details prior to purchase.

Option: These new machines are being sold as-is with pre-installation
checkout in Chatsworth, Califonia. Parts Warranty Only Starting at: $10,000.00

Equipped With:
   Heavy Duty Cross Roller Bearing Ways
   Dual Ground, Dual Contact "Big Plus" 12,000 RPM Spindle
   21-Tool, High Speed Tool Changer
   2,362 IPM Rapid Traverse Rates
   32-GB High Speed Data Server for Massive Prgram Memory
   High Speed Synchronous Rigid Tapping
   Coolant System for Cutting Tools
   Chip Wash Down Coolant Flushing System
   Air Gun & Coolant Gun
   Full Machine Enclosure Including Top Cover
   Spindle Air Blast by M-Code for Through Spindle & at the Cutting Tool
   Portable MPG Hand Wheel with Magnetic Base
   LED Worklight
   Heat Exchanger for Electrical Cabinet
   Machine Condition Signal Lamp - Tri-Color Stack Lamp
   Automatic Pressurized Centalized Lubrication System
   4th Axis Wiring Pre-Installed
   M30 Automatic Power-Off Turn Off the Circut Breaker

**The Mitsubishi control, motors, and drive package are covered by a 3-year
warranty. The Machine Has a One-Year Warranty**

Axis Travel
   X-Axis:                                27.56"        700mm
   Y-Axis:                                16.93"        430mm
   Z-Axis:                                12.99"        330mm
   Spindle Nose To Table Surface:         5.1"-18.1"    130-460mm
   Spindle Centerline To Column:          18.89"        480mm

Work Table
   Table Surface Dimension (X/Y):         33.04" x 15.75"850 x 400mm
   T-Slot Dimension/Spacing:              3-14mm Slots  125mm Spacing
   Table Height:                          35" Above Floor890mm
   Table Weight for Accuracy:             550 lbs       250 KG

Spindle
   Spindle Motor:                         Mitsubishi DJ-D5.5/120-01 - 7.5 HP
   Spindle Motor Coupling:                Inline Direct Drive
   Spindle Speed:                         12,000 RPM    15,000 RPM Optional
   Synchronous Tapping Speed Limit:       6,000 RPM
   Tapping Performance:                   M20 x 2.5 AluminumM14x2.0 Steel 
   Drilling Performance:                  38mm Aluminum 25mm Steel
   Spindle Torque:                        26 ft-lb @ 1500 RPM
   Tool Type:                             BT#30         4 Bearing Spindle
                                                        2 Top - 2 Bottom
   Spindle Bearing - Inner Diameter:      40mm          P4 Class
                                                        7 Steel Ball Bearings
   Spindle Material / Hardness:           SCM415        HRC 58-62
   Retention System / Holding:            MAS-P30T-1    Bellville Spring Stack
                                                        1650-1760 lbs
   Spindle Runout:                        <0.000040" TIR / Pull Stud USST B30-4500H

Axis Feeds (X/Y/Z)
   Rapid Traverse:                        2,362 IPM     60/60/60m/minute
   Rated Cutting Feedrate:                0.04 - 1181 IPM30/30/30m/minute
   Mechanical Way System:                 Roller Ways   Cross Roller 30/30/35
   Axis Drive Motor Power:                2 HP /3 HP    1.5 kw/2.2 kw w/ Brake
   Axis Thrust Force:                     3,335lbs/3,692lbs14840 N/16430 N
   Ballscrews:                            32mm          16mm Pitch
   Positioning Accuracy:                  +0.00015"     +0.004mm
   Positioning Reapeatability:            +0.00008"     +0.002mm
   Least Input Command Increment:         0.0001" / 0.000040"0.001mm 40 Millionths

Tool Changer
   Tool Capacity:                         21-Tools      Drum turret
   Tool Shank:                            BT#30         MAS P30T-1 Pull Stud
   Tool Change Time:                      1.6 Sec       Servo Motor Driven
   Tool Diameter with Adjacent Tool:      2.36"/3.15"   60mm/80mm w/No Tool
   Tool Length / Max. Tool Weight:        7.87"/6.6 lbs 200mm/ 3 kg
   Tool Selection / Tool Access:          Random        Bi-Directional

General
   Air Service Requirements:              85 psi @ 5 scfm6 kg/cm2
   Electrical Requirements:               16kva, 40 Apms22vac+5%, 60hz 
   Coolant Pump - Chip Flush Pump:        1.0 HP        .75kw
   Cutting Tools - HP / Pressure:         1.0 HP / 45 PSI.75kw
   Coolant Tank Capacity:                 40 Gallons    150 Liters
   Machine Dimesnions:                    73"x87"x95"   185x221x241 cm
   Machine Weight:                        6,770 lbs     3,070 kg

Genmill T-500 Machine Options
 Factory machine installation: "Peace-of-Mind Factory Installation"
*Includes Expenses*:                                    $2,995.00

 Factory On-Site 3-Day Machine Operation and Program Training
*Includes Expenses*:                                    POR

 Automatic Operator Door:                               POR
 Belt-Style Rear Discharge Chip Conveyor:               POR
 Auger-Style Chip Conveyor:                             POR
 15,000 RPM Spindle Speed Upgrade:                      POR
 Second-Year Machine Warranty:                          POR
 Voltage Stabilizers and Transformers
(specify voltage needs):                                POR

Dust Collection System:                                 POR

 Air Conditioner for Electrical Cabinet
Refrigerated-Style,Upgrade Over Standard Heat Exchanger:POR

 375 PSI Through-The-Spindle-Coolant Prep:              POR

 375 PSI Through-The-Spindle-Coolant Upgrade
(25-Bar - No Additional Coolant Tank Supplied:          POR

 Linear Scales For All 3-Axis
Heidenhain 5um Optical Liner Scales:                    POR