Iemca Maestro 80 No Limits Magazine Bar Feed

The Maestro 80 No Limits is an automatic bar feeder able to support bars from
10 to 80 mm ideal to work with fixed headstock lathes. For those who require
high performances combined with flexibility. Maestro 80 No Limits is the best
possible synthesis of maximization of productivity, great flexibility,
physical and cognitive ergonomics - all with a new, modern design.

Technical Specs
ROUND BARS 10 - 80 mm (3/8 - 3 1/8")
HEXAGONAL BARS 10 - 65 mm (3/8 - 2 9/16")
SQUARE BARS 10 - 50 mm (3/8 - 2")
BAR LENGTH 1,000 - 3,700 mm (3'3" - 12'2")
REMNANT LENGTH < 65 mm: 110 - 400 mm (4.33 - 15.75")
> 65 mm: 110 - 250 mm (4.33 - 9.84")
BAR WEIGHT Max 180 kg (397 lbs)
BAR CHANGEOVER TIME 30 sec (for bar length of 3,200 mm)
FEED RATE 500 mm/sec (1,180 in/min)
RETURN SPEED 1,000 mm/sec (2,360 in/min)
BAR FEEDER WEIGHT 1,800 kg (4,000 lbs)
COMPRESSED AIR 6 bar (87 psi)
INSTALLED POWER 2.3 kW
MP MAGAZINE AVAILABLE Single Rack 330 mm (13.0")
UP MAGAZINE AVAILABLE UP (Lower Single Rack) 600 mm (23.62")
(900 mm (35.43") option available)
(1,200 mm (47.24") option available)
OAB/F MAGAZINE AVAILABLE Bundle 2.5 tons (5,000 lbs)

Prices (subject to change without notice)

Bar Feeder

Maestro 80 No Limits 12 feet $68,990
Maestro 80 No Limits 12 feet with Open Access Bundle Magazine N.A.
Maestro 80 No Limits 12 feet with UP (Lower Single Rack) Magazine $76,990
Maestro 80 No Limits 14 feet $82,990
Maestro 80 No Limits 14 feet with Open Access Bundle Magazine N.A.
Maestro 80 No Limits 14 feet with UP (Lower Single Rack) Magazine $92,990

All bar feeders include: standard electrical and mechanical interface to the
lathe, remnant retraction system, front bushing device and 1 guide channel set
(1 Guide Channel, 1 Bar Pusher, 1 Rotating Tip, 1 Front Nose, 1 Collet and 1
Split Bushing)

Accessories

Category III interface (Dual Channel Safety Circuit Protection) $1,490
Special adaptation kit (Required for some lathes) $1,990

Options

Touch screen 7" panel Included
Additional guide channel (not needed for bar between 10&80 mm dia) $3,490
Spindle liner (not needed for bar between 10 and 80 mm diameter) $450
Additional collet (standard OD threaded collet) (20mm < D < 52mm) $120
Additional collet (standard OD threaded collet) (52mm < D < 80mm) $190
Additional Maestro bushing (needed with hex or square material) $450
Kit for additional status lights $80
Magazine extension (only for UP Magazine) $990
Trolley for bars (only for UP Magazine) $1,990
Kit for Industry 4.0 $2,990

Installation

Installation in USA, Canada and Mexico $3,900

Installation price includes labor, travel expenses, on site operator training
at the time of installation, 12 month parts and labor warranty