Buy Machinery Sell Your Machine Used Machines Auctions & Appraisals Appraisals New Machines Machine Videos Financing Blog & News Contact Who We Are
FACEBOOKLINKEDINYOUTUBEEBAY
(303) 651 - 6545
Used Machines
Advanced Grinding Systems AGS-3A
Model:
AGS-3A
Stock #:
401818
Manufacturer:
Advanced Grinding Systems
Advanced Grinding Systems AGS 42-3A High Speed Sintered Ceramic Vertical Grind/Mill Machining Center
X:
20"
Y:
20"
Z:
19"
To the best of our knowledge all details listed below are deemed correct.
It is the buyers responsibility to confirm ALL details prior to purchase.


Special Notes from the OEM......

The Tratech Advanced Grinding System(AGS) 42-3A is a breakthrough in the
advancing ceramics industry, with productivity improvements up to 10x times
faster than anything else today. The AGS is a specially built high speed
grind/mill machine designed specifically for the demanding needs of machining
fully sintered ceramics at a competitive price point. Designed to grind and
machine materials such as quartz glass, sapphire, boron carbide, alumina oxide
and zirconia nitride, providing unmatched machining capability, improved
quality and lower overall production costs.


General Specifications:
   Table Size:                            21" x 26" (533mm x 660mm)
   Travels:                               X = 20"
                                          Y = 20"
                                          Z = 19"
   T-Slot Spacing:                        4" (101.6mm)
   Load on Table:                         350 lbs (158kgs)
   Spindle Speed:                         42,000 RPM
   Tool Interface:                        HSK-E40
   Torque:                                4.77 lbs @ 14700 RPM (6.5Nm)
   Voltage:                               240/480 Volts

   Hydbrid Ceramic Bearing, Vibration Measuring System on 3-Axis ("G" Meter)
   Feed Rate:                             500in/min (12m/minutes)

   Tool Changer:                          255 Tools Max
                                          Interchangable 16 Tools  
* Tratech Corp. Proprietary tool change technology allows 16 active tools to
be loaded in seconds, with an additional 255 in tray storage. The trays are
hot swap enabled without interrupting active machining cycles.  *OTF (On The
Fly) System Allows for 16 Loaded Tools in Less Than 30 Seconds*


   Air Requirements:                      100 PSI/ 6.5 CFM (6.8 Bar/183L/Min)
   Coolant:                               57 Gal (215 Liters)
   Chiller:                               Heat Exchanger, Digital Control
   Mist Control:                          Turbine Unit w/ Hepa Filter

Machine Dimensions:                       79" x 79" x 100" (2M x 2M x 2,57M)
Machine Weight:                           9,800 lbs (4,222kgs)

CALL TODAY:  
SET UP A CONFERENCE CALL, DISCUSS YOUR NEEDS / REQUIREMENTS WITH AN EXPERT