Buy Machinery Sell Your Machine Used Machines Auctions & Appraisals Appraisals New Machines Machine Videos Financing Blog & News Contact Who We Are
FACEBOOKLINKEDINYOUTUBEEBAY
(303) 651 - 6545
Used Machines
EDGE RANGER 112
Model:
RANGER 112
Stock #:
399126
Manufacturer:
EDGE
New Edge Ranger 112 Magazine Bar Feed 1.5 - 12 mm (0.59" - 1/2") Range
Capacity:
0.5"
Bar Length:
12'
The Ranger 112 is an Automatic Magazine style Bar Feeder designed for feeding
round, square and hexagonal bar stock in lengths up to 12'5", in a diameter
range of 1.5-15mm, into CNC lathes.

The Ranger 112 comes equipped with a Mistubishi controller and belt drive
standard. It also features dual anti-vibration devices that stabilize the bar
stock at two critical points between the guide channel and lathe spindle
maximizing RPM potential. The polyurethane guide channels increase strength
and stability.




General Specifications from Manufacturer

All Specifications and Prices are subject to change without notice

Control:                               Mitsubishi motion control
Bar Diameter Capacity
   No Bar Preparation:                 1.5 mm to 12.7 mm (.059" to .500")
   With Bar Prep or front eject        1.5 mm to 12.7 mm (.059" to .594")
Maximum Bar Length:                    3800mm (12'5")
Minimum Bar Length:                    420mm (16.54")
Scroll Capacity:                       16 bars
Bar Loading Cycle Time:                35 seconds for 12' bars
Pusher Style:                          Double Pusher
Channel Style:                         Polyurethane Quick Change
Material Straightness Spec:            .007" TIR/foot of material
                                       (V Blocks. 3 points equidistance)

Feed Force (pusher Torque):            Max 450N Adjustable
Forward feed rate:                     1400 mm/sec max, adjustable
Return feed rate:                      2360mm/sec max, adjustable

Power Consumption:                     1.5 KW/2KVA
Operating Voltage:                     230V/60Hz 3-Phase
Control Voltage:                       24V DC

Oil Capacity:                          46 Liters (12 gallons)
Oil Viscosi8ty:                        ISO 100 cST
Compressed Air Suppluy:                0.6 MPA (6 bar) - 90 psi

Machine Weight (without oil):          1250 lbs
Dimension (Approx):                    181" x 24" x 49"


Guide channel chart

Channel  Pusher    Min Bar             Max Bar             Max Diam w/ Frnt 
Diam     Diam      Size                Size                Eject or Bar End
                                                           Prep
----------------------------------------------------------------------------
8 mm     7.5 mm    1.5 mm (.059")      6.4 mm (.250")      7 mm (.275")
11 mm    10 mm     3 mm (.118")        9 mm (.354")        10 mm (.393")
14 mm    12 mm     3.2 mm (.125")      11 mm (.437")       13 mm (.512")
16 mm    15 mm     5 mm (.196")        12.7 mm (.500")     15 mm (.594")

Standard Features:

 - (1) Guide channel set to be chosen by customer. Several sizes to choose
from, each handling a specific stock range. See chart below (spindle liner
required if channel set is not lathe's max capacity)
 - (1) Standard telescoping front nose matched to the guide channel set
 - (1) O.D. bar stock collet (to be chosen by customer, specific collet needed
for each stock diameter)
 - Swiss headstock synchronization device
 - Automatic remnant retraction, self centering gripper
 - Custom lathe cable and interface plugs


Optional:

(2) Guide channel Package:                                 $25,900
Installation (USA)                                         $ 3,450

Additional Guide Channels                                  $ 2,350
Spindle Liner:                                             $   520
Bar Stock Collets                                          $   140
Movable Antivibration Devise 
   Bushing Blocks (2-28mm) two set reqd                    $   240 ea
High Voltage Kit (required for some lathes)                $   750
Axial Shift with Safety Switches:                          $ 1,750

Master liner -                                             $   650
  required when undersizing barfeeder to lathe spindle (still requires spindle liner)


Ranger 112, 6'                                             $21,750
Ranger 112, 6', 2 channels                                 $23,900