Tecno Wasino JD-1 CNC Turning Center' New 2005
CNC Lathes (Turning Centers)Tecno Wasino JD-1 CNC Turning Center
New 2005
Bar Capacity | 1.5" |
Chuck Size | 3" |
Control | CNC (FANUC 21ITB) |
Equipped with (must be verified by buyer):
Fanuc series 21iTB control
Mayfran chip conveyor
Assorted microcentric 3" dia. collets
Assorted feed tubes
Losma darwin 600 mist collector
3" Microcentric chuck 1-for main spindle,
1 - for sub spindle
Coolblaster high presure pump 1000 psi
NC bar 17 3ft bar feed
General Specifications As Per Brochure (buyer to verify details):
Capacity:
Maximum swing dia.: 9-27/32"
Nominal workpiece(D x L): 1" x 1"
Maximum workpiece diameter: 1-1/2"
Maximum workpiece length: 2"
Bar capacity: 63/64" 1/2"
Main spindle headstock:
Center height from floor: 39"
Main spindle nose: 100 (4) flat nose
Main spindle bore: 1-3/4"
Main spindle front bearing ID: 2-15/16"
Number of main spindle speeds: Infinitely variable
Maximum main spindle speed: Min-1 6000
Standard main spindle chuck: Collet chuck SAD-25
Standard main spindle chuck bore: 63/64"
Subspindle headstock:
Subspindle nose: AS2-50
Subspindle bore:
Subspindle front bearing ID: 1-3/8"
Number of subspindle speeds: Infinitely variable
Maximum subspindle speed: Min-1 6000
Standard subspindle chuck: Collet chuck TC-13
Standard supspindle chuck bore: 1/2"
CNC feed axes:
X-axis (cross slide) travel: 3-1/8 + 3/16"
Z-axis (saddle) travel: 4-15/16 + 3-3/4"
B-axis (subspindle) travel: 9-27/32"
X-axis rapid traverse speed: m/min. (fpm) 15 (49.2)
Z-axis rapid traverse speed: m/min. (fpm) 15 (49.2)
B-axis rapid traverse speed: m/min. (fpm) 15 (49.2)
Turret:
Turret type: 8-station drum
Number of attachable tools: 8 pcs
Standard tool shank: 25/32"
Boring tool shank diameter: 1"
Maximum turret swing diameter: 13"
Motors:
Main spindle motor, cont./30min.: 5/7.5 HP
Subspindle motor, cont./15 min.: 0.75/1.5 HP
Dimensions of machine (approx.): 51" x 50" x 70 7/8"
Machine gross weight (approx.): 3300 lbs