LNS GT-326-E Magazine Bar Feed

General Specifications per brochure:

Technical Specifications
Bar Diameter: 1/8" to .787" (3 mm - 20 mm)
1.02" (26 mm) max. with bar preparation
Magazine Capacity: 10.6" (270 mm)
Model: 12'
Air pressure: 5-7 kg/cm (90-100 PSI)
Oil: ISO 100/ 28 liters
Power supply: 220V / 3 phase / 5 amps
(other voltages available)

Weight: 1,210 lbs
Dimensions: 4495mm x 513mm x 3790mm
177" x 21" x 149"

Features:
Hydrodynamic support of the revolving bar
2 minute setup for partial changeover
8 minute or less complete changeover
Quick change guiding channels and pushers
Ultra-light Remote Control Pendant (HMI) for easy setup
AC servo motor for pusher control
Automatic Torque and Speed Adjustment by easy programming
Automatic hydrostatic two-position front stabilizer, quick and easy manual
adjustment to bar diameter
Remnant Retraction System - bar end is extracted from the lathe and deposited
into a storage drawer
Easy manual diameter adjustment for magazine bar selection fingers (no tool
required)
High speed electronic headstock synchronization monitored by servo drive
Swiss safety connection for sliding headstock machines
Accommodates left or right spindle machine configuration
Optional Z-axis retraction and adjustable 2-position for non-guide bushing
applications

Base Unit $19,530.00

1/8" to .787" (3 mm to 20 mm) 1.02" max.
(26 mm) with bar preparation diameter x 12' 3" bar length
(Right or Left load available)
- 1 Guiding Channel Set with Pusher
- 1 Reduction Tube or Spindle Liner
- 1 Remnant Retract Collet (please specify stock size)
- High Speed Electronic Headstock Synchronization System
- Custom Electrical Cable Package with Plugs
- Manual Front Stabalizer Bar Support

PERFORMANCE PACKAGES

5/8" (16 mm) lathe capacity (complete package): $23,490.00
Including: 3 Guiding channels (17, 14, 11 mm I.D.),
3 collets, 2 reduction tubes or spindle liners

3/4" (20 mm) lathe capacity (complete package): $23,490.00
Including: 3 Guiding channels (23, 17, 11 mm I.D.),
3 collets, 2 reduction tubes or spindle liners

.984" (25 mm) lathe capacity (complete package): $23,490.00
Including: 3 Guiding channels (27, 21, 14 mm I.D.)
3 collets, 2 reduction tubes or spindle liners

GUIDING CHANNEL SET SELECTION CHART
Spindle Bore Dia 27 23 21 19 17 14 11 8
Guide Channel Dia 27 23 21 19 17 14 11 8
Bar Stock Range 14-23 13-20 11-18 8-16 7-14 4-10 3-8 3-5
without Bar Preparation
Bar Stock Range 23-26 20-22 18-20 16-18 14-16 10-12 8-10 5-7
with Bar Preparation

OPTIONAL ACCESSORIES

Guiding Channel Set, Including One Pusher: $2,035.00
Remnant Retract Collet:
-.078" - .437": $ 115.00
-.438" - .868": $ 140.00
-.869" - 1.249": $ 170.00
-Cone For Pusher .250" - 2.050": $ 190.00

T-Tube Liner (one required per channel set size): $ 160.00
Bar feeder retraction system: $ 1,015.00
(for easy access for machine maintenance) with
safety switch
Adjustable 2-position bar feeder retraction system: $ 1,340.00
with safety switches (Non-guide bushing applications)
Dual Channel Safety Circuit Protection (DCS) $ 535.00

INSTALLATION

USA Installation (Net): $3,450
Canada & Mexico Installation Price: $4,150