New LNS Alpha 538 Magazine Bar Feed

General Specifications As Per Brochure (Please Verify Details):

Bar Length: 39" - 12'6"
Barstock Capacity: .20" - 1.5"
Air Supply: 80 - 100 PSI
Hydraulic Oil: 14 Gal/ISO 100
Control Voltage: 24 V DC, 1 Amp
Shipping Weight: 2,680 lbs

==============================================================================

Base Unit with 1 setup $35,525.00

Setup includes:
Guiding Elements, Pusher flag, Pusher, Rotating Sleeve, Collet Adapter, Collet
according to bar stock size (round)

(Please specify bar stock size when ordering)

Production package includes Base Unit + 3 complete setups:
Guiding Elements, Pusher Flag, Pusher, Rotating Sleeve, Collet Adapter, 1
Collet. $40,820.00

Performance Package with 4 channels $44,030.00

Note:
A collet is required for each bar diameter, as the bar diameter approaches the
lathe capacity; the bar will require end turning preparation.

1-1/4" Bar Capacity - Complete Setups (1/4" - 1-1/4") - 35, 29, 23
1-1/2" Bar Capacity - Complete Setups (1/2" - 1-1/2") - 39, 28, 17

Optional Accessories

Additional Bearing Set (bearing element, pusher, collet, &
adapter) $ 3,105.00
Additional Bushing for Hydrostatic Front Stabilizer (1 set
required per stock size) $ 205.00
Tall stands for lathe centerline height 41-1/2" to 53-3/4"
(1054 mm to 1364 mm) $ 1,015.00
Additional T-Tube Liner $ 400.00
Spindle Liner for Non- Guide Bushing: $ 350.00
2-Position Z-axis retraction System $ 1,340.00
Outboard Stabilizer for non-guide bushing $ 805.00
Dual Channel Saftey Circuit Protection (DCS) $ 535.00

Cone for Pusher (remnant ejected thru spindle) one per bar size
from .250" to 1.654" $ 190.00

Remnant Collets
(one remnant collet is required for each bar diameter) priced per each
from .250" to .437": $ 115.00
from .438" to .868": $ 140.00
from .869" to 1.249": $ 170.00
from 1.250" to 1.873": $ 275.00

Steel Spindle Liners for Fixed Headstock Lathe
One spindle liner tube is required for each guiding element

Up to 3-1/8" Drawtube ID (round) $ 530.00
Surcharge for Hardened Liner $ 350.00
Coolant Collector Extension $ 700.00
Quick Change Adapter $ 580.00

Note: Steel price also includes extended style and 2-piece style liners

Installation (USA) $ 3,450.00
Installation (canada & Mexico) $ 4,150.00

For optimum rotational performance, bar stock straightness needs to be .020"
per 3.25 feet, non-accumulative. Barstock out of this tolerance will not run
at optimum RPM capability. Other factors such as material type (brass, copper,
bronze and other malleable materials), clamping efficiency of the machine
workholding, alignment of the barfeed, oil type, bar preparation and spindle
liners will effect optimum RPM capability of the system.