New Lexair Rhinobar RB 2.5 Hydrodynamic Single Tube Bar Feed

General Specifications from Brochure

Features: Single tube
Muzzle-loaded design
Capacity: 2 1/2" maximum
Length: 12'
Interchangeable feed tubes
= Three (3) feed tubes of customer selected sizes are included

Pump Motor: 1HP, 220/440 volt, 3 Phase
Overall Length: 18' (12' capacity model)
12' ( 6' capacity model)
Weight: 1700 lbs.

*** Prices subject to change without notice ***

Additional Feed Tubes - available in 1/4" increments from 2-3/4" and priced as
follows:

1/4",5/16",3/8",1/8",5/8",3/4",7/8",1",1-1/16",1-1/8"
1-1/4",1-3/8",1-1/2",1-5/8" $1,675.00 each

1-3/4",2",2-1/4",2-1/2" $1,800.00 each

Optional Spindle Liners - Each spindle liner size is priced as follows:
NOTE: Prices based on Lathe Draw tube I.D., not stock size.
1/4" thru 1-1/8" $675.00 each
2-1/4" thru 2-5/8" $675.00 each
2-3/4" thru 3-1/8" $690.00 each
3-1/4" thru 4-1/8" $950.00 each
4-1/4" thru 5-1/8" P.O.R.
5-1/4" thru 6-1/8" P.O.R.

For lathes with spindle bore to 3-1/8" that require
a spindle adapter add P.O.R.
For lathes with spindle bore over 3-1/8" adapters: P.O.R.

Optional Standard Rhinobar Customer Electrical Cable Package
with plugs $490.00
(Required if OEM Interface includes special plugs instead of terminal
strip.)
Optional Step Down Transformer For Use with Lathes That Operate P.O.R
on 440 Volts
(Required if OEM Interface includes special plugs instead of terminal strip)

NOTE: All bar stock must have a 30 degree chamfer cut on the pusher end to
achieve the highest performance.

Warranty - One year, parts and workmanship

Installation by Lexair Personnel $4,000.00
The standard installation includes set-up and leveling of the bar feeder,
alignment with lathe spindle
and bolting to floor (bolts included), electrical connection to lathe,
(interface supplied by builder), training and run-off of the bar feeder.

Proper training and run-off depend on the lathe being operational, tooled and
programmed, as well as stock and machine operator being available.

NOTE: Additional time, travel and expenses caused by customer, dealer or OEM
delays will be billed at $180.00 per hour on site, $100.00 per hour travel plus
expenses.

Delivery: approx 4-6 weeks